Edit

Share via

Set-CMSoftwareUpdatePointComponent

Module:
ConfigurationManager Module

Configure the site component for the software update point.

Syntax

SearchBySiteCodeMandatory (Default) 

Set-CMSoftwareUpdatePointComponent
    [-AddCompany <String[]>]
    [-AddLanguageSummaryDetail <String[]>]
    [-AddLanguageUpdateFile <String[]>]
    [-AddProduct <String[]>]
    [-AddProductFamily <String[]>]
    [-AddUpdateClassification <String[]>]
    [-ContentFileOption <ContentFileOptions>]
    [-DefaultWsusServer <String>]
    [-EnableCallWsusCleanupWizard <Boolean>]
    [-EnableManualCertManagement <Boolean>]
    [-EnableSyncFailureAlert <Boolean>]
    [-EnableThirdPartyUpdates <Boolean>]
    [-FeatureUpdateMaxRuntimeMins <Int32>]
    [-ImmediatelyExpireSupersedence <Boolean>]
    [-ImmediatelyExpireSupersedenceForFeature <Boolean>]
    [-NonFeatureUpdateMaxRuntimeMins <Int32>]
    [-PassThru]
    [-RemoveCompany <String[]>]
    [-RemoveLanguageSummaryDetail <String[]>]
    [-RemoveLanguageUpdateFile <String[]>]
    [-RemoveProduct <String[]>]
    [-RemoveProductFamily <String[]>]
    [-RemoveUpdateClassification <String[]>]
    [-ReportingEvent <ReportingEventType>]
    [-Schedule <IResultObject>]
    [-SiteCode <String>]
    [-SynchronizeAction <SynchronizeActionType>]
    [-UpstreamSourceLocation <String>]
    [-WaitMonth <Int32>]
    [-WaitMonthForFeature <Int32>]
    [-DisableWildcardHandling]
    [-ForceWildcardHandling]
    [-WhatIf]
    [-Confirm]
    [<CommonParameters>]

SearchByNameMandatory 

Set-CMSoftwareUpdatePointComponent
    -Name <String>
    [-AddCompany <String[]>]
    [-AddLanguageSummaryDetail <String[]>]
    [-AddLanguageUpdateFile <String[]>]
    [-AddProduct <String[]>]
    [-AddProductFamily <String[]>]
    [-AddUpdateClassification <String[]>]
    [-ContentFileOption <ContentFileOptions>]
    [-DefaultWsusServer <String>]
    [-EnableCallWsusCleanupWizard <Boolean>]
    [-EnableManualCertManagement <Boolean>]
    [-EnableSyncFailureAlert <Boolean>]
    [-EnableThirdPartyUpdates <Boolean>]
    [-FeatureUpdateMaxRuntimeMins <Int32>]
    [-ImmediatelyExpireSupersedence <Boolean>]
    [-ImmediatelyExpireSupersedenceForFeature <Boolean>]
    [-NonFeatureUpdateMaxRuntimeMins <Int32>]
    [-PassThru]
    [-RemoveCompany <String[]>]
    [-RemoveLanguageSummaryDetail <String[]>]
    [-RemoveLanguageUpdateFile <String[]>]
    [-RemoveProduct <String[]>]
    [-RemoveProductFamily <String[]>]
    [-RemoveUpdateClassification <String[]>]
    [-ReportingEvent <ReportingEventType>]
    [-Schedule <IResultObject>]
    [-SynchronizeAction <SynchronizeActionType>]
    [-UpstreamSourceLocation <String>]
    [-WaitMonth <Int32>]
    [-WaitMonthForFeature <Int32>]
    [-DisableWildcardHandling]
    [-ForceWildcardHandling]
    [-WhatIf]
    [-Confirm]
    [<CommonParameters>]

SearchByValueMandatory 

Set-CMSoftwareUpdatePointComponent
    -InputObject <IResultObject>
    [-AddCompany <String[]>]
    [-AddLanguageSummaryDetail <String[]>]
    [-AddLanguageUpdateFile <String[]>]
    [-AddProduct <String[]>]
    [-AddProductFamily <String[]>]
    [-AddUpdateClassification <String[]>]
    [-ContentFileOption <ContentFileOptions>]
    [-DefaultWsusServer <String>]
    [-EnableCallWsusCleanupWizard <Boolean>]
    [-EnableManualCertManagement <Boolean>]
    [-EnableSyncFailureAlert <Boolean>]
    [-EnableThirdPartyUpdates <Boolean>]
    [-FeatureUpdateMaxRuntimeMins <Int32>]
    [-ImmediatelyExpireSupersedence <Boolean>]
    [-ImmediatelyExpireSupersedenceForFeature <Boolean>]
    [-NonFeatureUpdateMaxRuntimeMins <Int32>]
    [-PassThru]
    [-RemoveCompany <String[]>]
    [-RemoveLanguageSummaryDetail <String[]>]
    [-RemoveLanguageUpdateFile <String[]>]
    [-RemoveProduct <String[]>]
    [-RemoveProductFamily <String[]>]
    [-RemoveUpdateClassification <String[]>]
    [-ReportingEvent <ReportingEventType>]
    [-Schedule <IResultObject>]
    [-SynchronizeAction <SynchronizeActionType>]
    [-UpstreamSourceLocation <String>]
    [-WaitMonth <Int32>]
    [-WaitMonthForFeature <Int32>]
    [-DisableWildcardHandling]
    [-ForceWildcardHandling]
    [-WhatIf]
    [-Confirm]
    [<CommonParameters>]

Description

Use this cmdlet to configure the site component for the software update point. Use it after you add a software update point, for example with the Add-CMSoftwareUpdatePoint cmdlet. You can also use this cmdlet to reconfigure an existing software update point.

A software update point component interacts with a Windows Server Update Services (WSUS) server to configure update settings, request synchronization to the upstream update source, and synchronize updates from the WSUS database to the site server database on the central site.

For more information, see Site components for Configuration Manager.

Note

Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.

Examples

Example 1: Modify a software update point site component

The first command gets a software update point component object from the XYZ site. The command stores the object in the $supComp variable.

The second command creates a schedule object to recur every three days.

This example then splats the cmdlet parameters into the parameters variable. It's not required to splat the parameters, it just makes it easier to read the parameters for such a long command line.

The last command modifies common properties of the software update point component.

$supComp = Get-CMSoftwareUpdatePointComponent -SiteSystemServerName 'sup1.contoso.com' -SiteCode 'XYZ'

$schedule = New-CMSchedule -RecurCount 3 -RecurInterval Days -Start "2020/1/7 12:00:00"

$addLang = "Dutch"
$removeLang = "English"

$parameters = @{
  InputObject = $supComp
  DefaultWsusServer = 'sup.contoso.com'
  SynchronizeAction = 'SynchronizeFromMicrosoftUpdate'
  ReportingEvent = 'CreateAllWsusReportingEvents'
  RemoveUpdateClassification = "Update Rollups"
  AddUpdateClassification = "Critical Updates"
  Schedule = $schedule
  EnableSyncFailureAlert = $true
  ImmediatelyExpireSupersedence = $true
  AddLanguageUpdateFile = $addLang
  AddLanguageSummaryDetails = $addLang
  RemoveLanguageUpdateFile = $removeLang
  RemoveLanguageSummaryDetails = $removeLang
}

Set-CMSoftwareUpdatePointComponent @parameters

Example 2: Disable software update point synchronization

The following command removes the schedule from the site component, which disables synchronization.

Set-CMSoftwareUpdatePointComponent -Name "Contoso-SiteSysSrv.Western.Contoso.com" -Schedule $null

Parameters

-AddCompany

This parameter is a string array of company names. Use this option to synchronize the entire company's list of Products.

To remove an entire company from this list, use the RemoveCompany parameter.

For more information, see Configure classifications and products to synchronize.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False
Aliases:AddCompanies

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-AddLanguageSummaryDetail

This parameter is a string array of language names. Use this option to download Summary details for the specified languages.

To remove languages from this list, use the RemoveLanguageSummaryDetail parameter.

For more information, see Plan for synchronization settings - Languages.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False
Aliases:AddLanguageSummaryDetails

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-AddLanguageUpdateFile

This parameter is a string array of language names. Use this option to download the Software update file for the specified languages.

To remove languages from this list, use the RemoveLanguageUpdateFile parameter.

For more information, see Plan for synchronization settings - Languages.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-AddProduct

This parameter is a string array of product names. Use this option to synchronize Products.

To remove a product from this list, use the RemoveProduct parameter.

For more information, see Configure classifications and products to synchronize.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False
Aliases:AddProducts

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-AddProductFamily

This parameter is a string array of product family names. Use this option to synchronize a product family's list of Products.

To remove an entire product family from this list, use the RemoveProductFamily parameter.

For more information, see Configure classifications and products to synchronize.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False
Aliases:AddProductFamilies

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-AddUpdateClassification

This parameter is a string array of update classifications. Use this option to synchronize specific software update Classifications.

To remove a classification from this list, use the RemoveUpdateClassification parameter.

For more information, see Configure classifications and products to synchronize.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Parameter properties

Type:SwitchParameter
Default value:False
Supports wildcards:False
DontShow:False
Aliases:cf

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-ContentFileOption

Use this parameter to configure how the software update point downloads update files. Express installation files provide smaller download and faster installation on computers because only the necessary files are downloaded and installed. They're larger files and will increase download times for your site servers and distribution points.

  • FullFilesOnly: Download full files for all approved updates
  • ExpressForWindows10Only: Download both full files for all approved updates and express installation files for Windows 10 or later

Parameter properties

Type:ContentFileOptions
Default value:None
Accepted values:FullFilesOnly, ExpressForWindows10Only
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-DefaultWsusServer

Specify the FQDN of the WSUS server.

Parameter properties

Type:String
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-DisableWildcardHandling

This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.

Parameter properties

Type:SwitchParameter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-EnableCallWsusCleanupWizard

Set this parameter to $true to enable WSUS cleanup tasks to run after synchronization. For more information, see Software updates maintenance.

Parameter properties

Type:Boolean
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-EnableManualCertManagement

Set this parameter to $true to manually manage the WSUS signing certificate for third-party updates. This parameter is dependent on the EnableThirdPartyUpdates parameter.

For more information, see Enable third-party updates.

Parameter properties

Type:Boolean
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-EnableSyncFailureAlert

Set this parameter to $true to enable the component to create an alert when synchronization fails.

Parameter properties

Type:Boolean
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-EnableThirdPartyUpdates

Set this parameter to $true to Enable third-party software updates. You can also use the EnableManualCertManagement parameter.

For more information, see Enable third-party updates.

Parameter properties

Type:Boolean
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-FeatureUpdateMaxRuntimeMins

Specify an integer value for the default maximum amount of time a software update installation has to complete. You can override this default for a specific update. This setting only affects newly synchronized updates. This parameter only applies to Windows feature updates.

To configure the maximum run time for Office 365 updates and non-feature updates for Windows, use the NonFeatureUpdateMaxRuntimeMins parameter.

For more information, see Plan for synchronization settings.

Parameter properties

Type:Int32
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-ForceWildcardHandling

This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.

Parameter properties

Type:SwitchParameter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-ImmediatelyExpireSupersedence

Set this parameter to $true to immediately expire a software update when another update supersedes it or after a specified period of time.

If you specify a value of $False for this parameter, specify the number of months to wait for expiration by using the WaitMonth parameter.

Some updates never expire, for example definition updates.

If you change this setting, the site starts a full synchronization.

To configure this behavior for Windows feature updates, use the ImmediatelyExpireSupersedenceForFeature parameter.

Parameter properties

Type:Boolean
Default value:None
Supports wildcards:False
DontShow:False
Aliases:ImmediatelyExpireSupersedenceForNonFeature

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-ImmediatelyExpireSupersedenceForFeature

Set this parameter to $true to immediately expire a Windows feature update when another update supersedes it or after a specified period of time.

If you specify a value of $False for this parameter, specify the number of months to wait for expiration by using the WaitMonthForFeature parameter.

If you change this setting, the site starts a full synchronization.

To configure this behavior for non-feature updates, use the ImmediatelyExpireSupersedence parameter.

Parameter properties

Type:Boolean
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-InputObject

Specify a software update point site component object to configure. To get this object, use the Get-CMSoftwareUpdatePointComponent cmdlet.

Parameter properties

Type:IResultObject
Default value:None
Supports wildcards:False
DontShow:False
Aliases:Site, SiteComponent

Parameter sets

SearchByValueMandatory
Position:Named
Mandatory:True
Value from pipeline:True
Value from pipeline by property name:False
Value from remaining arguments:False

-Name

Specify the name of a site system server with the software update point role.

Parameter properties

Type:String
Default value:None
Supports wildcards:False
DontShow:False
Aliases:SiteName

Parameter sets

SearchByNameMandatory
Position:Named
Mandatory:True
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-NonFeatureUpdateMaxRuntimeMins

Specify an integer value for the default maximum amount of time a software update installation has to complete. You can override this default for a specific update. This setting only affects newly synchronized updates. This parameter only applies to Office 365 updates and non-feature updates for Windows.

To configure the maximum run time for Windows feature updates, use the FeatureUpdateMaxRuntimeMins parameter.

For more information, see Plan for synchronization settings.

Parameter properties

Type:Int32
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-PassThru

Add this parameter to return an object that represents the item with which you're working. By default, this cmdlet may not generate any output.

Parameter properties

Type:SwitchParameter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-RemoveCompany

This parameter is a string array of company names. Use this option to not synchronize the entire company's list of Products.

To add an entire company to this list, use the AddCompany parameter.

For more information, see Configure classifications and products to synchronize.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False
Aliases:RemoveCompanies

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-RemoveLanguageSummaryDetail

This parameter is a string array of language names. Use this option to not download Summary details for the specified languages.

To add languages to this list, use the AddLanguageSummaryDetail parameter.

For more information, see Plan for synchronization settings - Languages.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False
Aliases:RemoveLanguageSummaryDetails

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-RemoveLanguageUpdateFile

This parameter is a string array of language names. Use this option to not download the Software update file for the specified languages.

To add languages to this list, use the AddLanguageUpdateFile parameter.

For more information, see Plan for synchronization settings - Languages.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-RemoveProduct

This parameter is a string array of product names. Use this option to not synchronize Products.

To add a product to this list, use the AddProduct parameter.

For more information, see Configure classifications and products to synchronize.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False
Aliases:RemoveProducts

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-RemoveProductFamily

This parameter is a string array of product family names. Use this option to not synchronize a product family's list of Products.

To add an entire product family to this list, use the AddProductFamily parameter.

For more information, see Configure classifications and products to synchronize.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False
Aliases:RemoveProductFamilies

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-RemoveUpdateClassification

This parameter is a string array of update classifications. Use this option to not synchronize specific software update Classifications.

To add a classification to this list, use the AddUpdateClassification parameter.

For more information, see Configure classifications and products to synchronize.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-ReportingEvent

Specify whether the Windows Update Agent (WUA) on clients create event messages for WSUS reporting. Configuration Manager doesn't use these events. Don't create these events, unless you require them for other uses.

Parameter properties

Type:ReportingEventType
Default value:None
Accepted values:DoNotCreateWsusReportingEvents, CreateOnlyWsusStatusReportingEvents, CreateAllWsusReportingEvents
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-Schedule

Specify a Schedule object to enable synchronization. To disable synchronization, set this parameter to $null.

To get a schedule object, use the New-CMSchedule cmdlet.

Parameter properties

Type:IResultObject
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-SiteCode

Specify the three-character code for the site at which to configure its software update point component.

Parameter properties

Type:String
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

SearchBySiteCodeMandatory
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-SynchronizeAction

Specify the synchronization source for this software update point.

If you select a value of SynchronizeFromAnUpstreamDataSourceLocation, specify the data source ___location by using the UpstreamSourceLocation parameter.

For more information, see Plan for synchronization settings.

Parameter properties

Type:SynchronizeActionType
Default value:None
Accepted values:SynchronizeFromMicrosoftUpdate, SynchronizeFromAnUpstreamDataSourceLocation, DoNotSynchronizeFromMicrosoftUpdateOrUpstreamDataSource
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-UpstreamSourceLocation

Specify an upstream data ___location as a URL. For example, https://wsusserver.contoso.com:8531

To use this ___location, specify SynchronizeFromAnUpstreamDataSourceLocation for the SynchronizeAction parameter.

Parameter properties

Type:String
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-WaitMonth

Set the integer value for the number of months to wait before a software update expires after another update supersedes it.

This parameter depends on the ImmediatelyExpireSupersedence parameter.

Parameter properties

Type:Int32
Default value:None
Supports wildcards:False
DontShow:False
Aliases:WaitMonthForNonFeature

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-WaitMonthForFeature

Set the integer value for the number of months to wait before a Windows feature update expires after another update supersedes it.

This parameter depends on the ImmediatelyExpireSupersedenceForFeature parameter.

Parameter properties

Type:Int32
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet doesn't run.

Parameter properties

Type:SwitchParameter
Default value:False
Supports wildcards:False
DontShow:False
Aliases:wi

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

Inputs

Microsoft.ConfigurationManagement.ManagementProvider.IResultObject

Outputs

IResultObject

Notes

For more information on this return object and its properties, see SMS_SCI_Component server WMI class.