Microsoft Foundry – Schnellstart

1. Installieren Sie diese Pakete:

   pip install openai azure-identity azure-ai-projects==1.0.0
   

2. Microsoft Foundry Models ermöglicht Es Kunden, die leistungsstärksten Modelle von Flagship-Modellanbietern mit einem einzigen Endpunkt und anmeldeinformationen zu nutzen. Dies bedeutet, dass Sie zwischen Modellen wechseln und diese aus Ihrer Anwendung nutzen können, ohne eine einzelne Codezeile zu ändern.

   Kopieren Sie den Endpunkt des Foundry-Projekts im Abschnitt "Übersicht" Ihres Projekts. Sie verwenden sie in Kürze.

   

   Tip

   Wenn der Endpunkt des Foundry-Projekts nicht angezeigt wird, verwenden Sie ein hubbasiertes Projekt. (Siehe Projekttypen). Wechseln Sie zu einem Foundry-Projekt, oder verwenden Sie die vorherigen Schritte, um ein Projekt zu erstellen.

   1. Wählen Sie "Start" in der oberen rechten Navigationsleiste aus.
   2. Wählen Sie Schlüssel aus, und kopieren Sie den Endpunkt. Sie verwenden sie in Kürze.

3. Stellen Sie sicher, dass Sie sich mit dem CLI-Befehl az login (oder az login --use-device-code) anmelden, um sich zu authentifizieren, bevor Sie Ihre Python-Skripts ausführen.

Folgen Sie der Anleitung unten oder holen Sie sich den Code:

1. Installieren von Paketen:

   Um mit Foundry Tools in Ihrem .NET-Projekt zu arbeiten, müssen Sie mehrere NuGet-Pakete installieren. Fügen Sie NuGet-Pakete mithilfe der .NET CLI im integrierten Terminal hinzu:

   # Add Azure AI SDK packages
   dotnet add package Azure.Identity
   dotnet add package Azure.AI.Projects 
   dotnet add package Azure.AI.Agents.Persistent
   dotnet add package Azure.AI.Inference
   

2. Microsoft Foundry Models ermöglicht Es Kunden, die leistungsstärksten Modelle von Flagship-Modellanbietern mit einem einzigen Endpunkt und anmeldeinformationen zu nutzen. Dies bedeutet, dass Sie zwischen Modellen wechseln und diese aus Ihrer Anwendung nutzen können, ohne eine einzelne Codezeile zu ändern.

   Kopieren Sie den Endpunkt des Foundry-Projekts im Abschnitt "Übersicht" Ihres Projekts. Sie verwenden sie in Kürze.

   

   Tip

   Wenn der Endpunkt des Foundry-Projekts nicht angezeigt wird, verwenden Sie ein hubbasiertes Projekt. (Siehe Projekttypen). Wechseln Sie zu einem Foundry-Projekt, oder verwenden Sie die vorherigen Schritte, um ein Projekt zu erstellen.

   1. Wählen Sie "Start" in der oberen rechten Navigationsleiste aus.
   2. Wählen Sie Schlüssel aus, und kopieren Sie den Endpunkt. Sie verwenden sie in Kürze.

3. Legen Sie diese Umgebungsvariablen fest, die in Ihren Skripts verwendet werden sollen. Dies AZURE_AI_ENDPOINT ist der Projektendpunkt, den Sie zuvor kopiert haben. Entfernen Sie alles nach .com/ in diesem Endpunkt, um AZURE_AI_INFERENCE zu formen.

   AZURE_AI_ENDPOINT=https://your.services.ai.azure.com/api/projects/project
   AZURE_AI_INFERENCE=https://your.services.ai.azure.com/
   AZURE_AI_MODEL=your_model_name
   

   Tip

   Die Agentbeispiele erfordern, dass die AZURE_AI_MODEL Umgebungsvariable auf ein openAI-kompatibles Modell festgelegt wird, z. B. gpt-4.1da nicht alle Modelle für Agent-Anwendungsfälle unterstützt werden, einschließlich Tools.

4. Stellen Sie sicher, dass Sie sich mit dem BEFEHL CLI az login (oder az login --use-device-code) anmelden, um sich zu authentifizieren, bevor Sie Ihre C#-Skripts ausführen.

Folgen Sie der Anleitung unten oder holen Sie sich den Code:

1. Stellen Sie sicher, dass Sie sich mit dem CLI-Befehl az login (oder az login --use-device-code) anmelden, um sich zu authentifizieren, bevor Sie Ihre TypeScript-Skripts ausführen.

2. Herunterladen package.json.

3. Pakete installieren mit npm install

4. Microsoft Foundry Models ermöglicht Es Kunden, die leistungsstärksten Modelle von Flagship-Modellanbietern mit einem einzigen Endpunkt und anmeldeinformationen zu nutzen. Dies bedeutet, dass Sie zwischen Modellen wechseln und diese aus Ihrer Anwendung nutzen können, ohne eine einzelne Codezeile zu ändern.

   Kopieren Sie den Endpunkt des Foundry-Projekts im Abschnitt "Übersicht" Ihres Projekts. Sie verwenden sie in Kürze.

   

   Tip

   Wenn der Endpunkt des Foundry-Projekts nicht angezeigt wird, verwenden Sie ein hubbasiertes Projekt. (Siehe Projekttypen). Wechseln Sie zu einem Foundry-Projekt, oder verwenden Sie die vorherigen Schritte, um ein Projekt zu erstellen.

   1. Wählen Sie "Start" in der oberen rechten Navigationsleiste aus.
   2. Wählen Sie Schlüssel aus, und kopieren Sie den Endpunkt. Sie verwenden sie in Kürze.

5. Legen Sie diese Umgebungsvariablen fest, die in Ihren Skripts verwendet werden sollen:

   MODEL_DEPLOYMENT_NAME=gpt-4o
   PROJECT_ENDPOINT=https://<your-foundry-resource-name>.services.ai.azure.com/api/projects/<your-foundry-project-name>
   

Folgen Sie der Anleitung unten oder holen Sie sich den Code:

1. Microsoft Foundry Models ermöglicht Es Kunden, die leistungsstärksten Modelle von Flagship-Modellanbietern mit einem einzigen Endpunkt und anmeldeinformationen zu nutzen. Dies bedeutet, dass Sie zwischen Modellen wechseln und diese aus Ihrer Anwendung nutzen können, ohne eine einzelne Codezeile zu ändern.

   Kopieren Sie den Endpunkt des Foundry-Projekts im Abschnitt "Übersicht" Ihres Projekts. Sie verwenden sie in Kürze.

   

   Tip

   Wenn der Endpunkt des Foundry-Projekts nicht angezeigt wird, verwenden Sie ein hubbasiertes Projekt. (Siehe Projekttypen). Wechseln Sie zu einem Foundry-Projekt, oder verwenden Sie die vorherigen Schritte, um ein Projekt zu erstellen.

   1. Wählen Sie "Start" in der oberen rechten Navigationsleiste aus.
   2. Wählen Sie Schlüssel aus, und kopieren Sie den Endpunkt. Sie verwenden sie in Kürze.

2. Legen Sie diese Umgebungsvariablen fest, die in Ihren Skripts verwendet werden sollen:

   MODEL_DEPLOYMENT_NAME=gpt-4o
   PROJECT_ENDPOINT=https://<your-foundry-resource-name>.services.ai.azure.com/api/projects/<your-foundry-project-name>
   

3. Stellen Sie sicher, dass Sie sich mit dem CLI-Befehl az login (oder az login --use-device-code) anmelden, um sich zu authentifizieren, bevor Sie Ihre Java-Skripts ausführen.

4. Laden Sie POM.XML auf Ihre Java-IDE herunter.

Folgen Sie der Anleitung unten oder holen Sie sich den Code:

1. Stellen Sie sicher, dass Sie sich mit dem CLI-Befehl az login (oder az login --use-device-code) anmelden, um sich zu authentifizieren, bevor Sie den nächsten Befehl ausführen.

2. Rufen Sie ein temporäres Zugriffstoken ab. Es läuft in 60-90 Minuten ab, du musst danach aktualisieren.

   az account get-access-token --scope https://ai.azure.com/.default
   

3. Speichern Sie die Ergebnisse als Umgebungsvariable AZURE_AI_AUTH_TOKEN.

Folgen Sie der Anleitung unten oder holen Sie sich den Code:

Es ist keine Installation erforderlich, um das Foundry-Portal zu verwenden.

1. Installieren Sie diese Pakete, einschließlich der Vorschauversion von azure-ai-projects. Diese Version verwendet die Agents v2-API (Vorschau).

   pip install azure-ai-projects --pre
   pip install openai azure-identity python-dotenv
   

2. Stellen Sie sicher, dass Sie sich mit dem CLI-Befehl az login (oder az login --use-device-code) anmelden, um sich zu authentifizieren, bevor Sie Ihre Python-Skripts ausführen.

Folgen Sie der Anleitung unten oder holen Sie sich den Code:

1. Installieren von Paketen:

   Fügen Sie NuGet-Pakete mithilfe der .NET CLI im integrierten Terminal hinzu: Diese Pakete verwenden die Agents v2-API (Vorschau).

   dotnet add package Azure.AI.Agents --prerelease
   dotnet add package Azure.AI.Projects --prerelease
   dotnet add package Azure.Identity
   dotnet add package OpenAI --version 2.6.*
   

2. Stellen Sie sicher, dass Sie sich mit dem BEFEHL CLI az login (oder az login --use-device-code) anmelden, um sich zu authentifizieren, bevor Sie Ihre C#-Skripts ausführen.

Folgen Sie der Anleitung unten oder holen Sie sich den Code:

1. Stellen Sie sicher, dass Sie sich mit dem CLI-Befehl az login (oder az login --use-device-code) anmelden, um sich zu authentifizieren, bevor Sie den nächsten Befehl ausführen.

2. Rufen Sie ein temporäres Zugriffstoken ab. Es läuft in 60-90 Minuten ab, du musst danach aktualisieren.

   az account get-access-token --scope https://ai.azure.com/.default
   

3. Speichern Sie die Ergebnisse als Umgebungsvariable AZURE_AI_AUTH_TOKEN.

Folgen Sie der Anleitung unten oder holen Sie sich den Code:

Es ist keine Installation erforderlich, um das Foundry-Portal zu verwenden.

Ersetzen Sie den endpoint in diesem Code durch Ihren Endpunkt:

from azure.ai.projects import AIProjectClient
from azure.identity import DefaultAzureCredential

project = AIProjectClient(
    endpoint="https://your-foundry-resource-name.ai.azure.com/api/projects/project-name",
    credential=DefaultAzureCredential(),
)

models = project.get_openai_client(api_version="2024-10-21")
response = models.chat.completions.create(
    model="gpt-4o",
    messages=[
        {"role": "system", "content": "You are a helpful writing assistant"},
        {"role": "user", "content": "Write me a poem about flowers"},
    ],
)

print(response.choices[0].message.content)

using System.ClientModel.Primitives;
using Azure.Identity;
using OpenAI;
using OpenAI.Chat;

#pragma warning disable OPENAI001

string projectEndpoint = System.Environment.GetEnvironmentVariable("AZURE_AI_INFERENCE")!;
string modelDeploymentName = System.Environment.GetEnvironmentVariable("AZURE_AI_MODEL")!;

BearerTokenPolicy tokenPolicy = new(
    new DefaultAzureCredential(),
    "https://ai.azure.com/.default");
OpenAIClient openAIClient = new(
    authenticationPolicy: tokenPolicy,
    options: new OpenAIClientOptions()
    {
        Endpoint = new($"{projectEndpoint}/openai/v1"),
    });
ChatClient chatClient = openAIClient.GetChatClient(modelDeploymentName);

ChatCompletion completion = await chatClient.CompleteChatAsync(
    [
        new SystemChatMessage("You are a helpful assistant."),
                    new UserChatMessage("How many feet are in a mile?")
    ]);

Console.WriteLine(completion.Content[0].Text);

// Get the Azure AI endpoint and deployment name from environment variables
const endpoint = process.env.PROJECT_ENDPOINT as string;
const deployment = process.env.MODEL_DEPLOYMENT_NAME || 'gpt-4o';

// Create an Azure OpenAI Client
const project = new AIProjectClient(endpoint, new DefaultAzureCredential());
const client = await project.getAzureOpenAIClient({
    // The API version should match the version of the Azure OpenAI resource
    apiVersion: "2024-12-01-preview"
});

// Create a chat completion
const chatCompletion = await client.chat.completions.create({
    model: deployment,
    messages: [
        { role: "system", content: "You are a helpful writing assistant" },
        { role: "user", content: "Write me a poem about flowers" },
    ],
});
console.log(`\n==================== 🌷 COMPLETIONS POEM ====================\n`);
console.log(chatCompletion.choices[0].message.content);

package com.azure.ai.foundry.samples;

import com.azure.ai.inference.ChatCompletionsClient;
import com.azure.ai.inference.ChatCompletionsClientBuilder;
import com.azure.ai.inference.models.ChatCompletions;
import com.azure.core.credential.AzureKeyCredential;
import com.azure.core.credential.TokenCredential;
import com.azure.core.exception.HttpResponseException;
import com.azure.core.util.logging.ClientLogger;
import com.azure.identity.DefaultAzureCredentialBuilder;

/**
 * Sample demonstrating non-streaming chat completion functionality
 * using the Azure AI Inference SDK, wired to your AOAI project endpoint.
 *
 * Environment variables:
 * - PROJECT_ENDPOINT:          Required. Your Azure AI project endpoint.
 * - AZURE_AI_API_KEY:          Optional. Your API key (falls back to DefaultAzureCredential).
 * - AZURE_MODEL_DEPLOYMENT_NAME: Optional. Model deployment name (default: "phi-4").
 * - AZURE_MODEL_API_PATH:      Optional. API path segment (default: "deployments").
 * - CHAT_PROMPT:               Optional. The prompt to send (uses a default if not provided).
 * 
 * SDK Features Demonstrated:
 * - Using the Azure AI Inference SDK (com.azure:azure-ai-inference:1.0.0-beta.5)
 * - Creating a ChatCompletionsClient with Azure or API key authentication
 * - Configuring endpoint paths for different model deployments
 * - Using the simplified complete() method for quick completions
 * - Accessing response content through strongly-typed objects
 * - Implementing proper error handling for service requests
 * - Choosing between DefaultAzureCredential and AzureKeyCredential
 * 
 */

public class ChatCompletionSample {
    private static final ClientLogger logger = new ClientLogger(ChatCompletionSample.class);

    public static void main(String[] args) {
        // 1) Read and validate the project endpoint
        String projectEndpoint = System.getenv("PROJECT_ENDPOINT");
        if (projectEndpoint == null || projectEndpoint.isBlank()) {
            logger.error("PROJECT_ENDPOINT is required but not set");
            return;
        }

        // 2) Optional auth + model settings
        String apiKey          = System.getenv("AZURE_AI_API_KEY");
        String deploymentName  = System.getenv("AZURE_MODEL_DEPLOYMENT_NAME");
        String apiPath         = System.getenv("AZURE_MODEL_API_PATH");
        String prompt          = System.getenv("CHAT_PROMPT");

        if (deploymentName == null || deploymentName.isBlank()) {
            deploymentName = "phi-4";
            logger.info("No AZURE_MODEL_DEPLOYMENT_NAME provided, using default: {}", deploymentName);
        }
        if (apiPath == null || apiPath.isBlank()) {
            apiPath = "deployments";
            logger.info("No AZURE_MODEL_API_PATH provided, using default: {}", apiPath);
        }
        if (prompt == null || prompt.isBlank()) {
            prompt = "What best practices should I follow when asking an AI model to review Java code?";
            logger.info("No CHAT_PROMPT provided, using default prompt: {}", prompt);
        }

        try {
            // 3) Build the full inference endpoint URL
            String fullEndpoint = projectEndpoint.endsWith("/") 
                ? projectEndpoint 
                : projectEndpoint + "/";
            fullEndpoint += apiPath + "/" + deploymentName;
            logger.info("Using inference endpoint: {}", fullEndpoint);

            // 4) Create the client with key or token credential :contentReference[oaicite:0]{index=0}
            ChatCompletionsClient client;
            if (apiKey != null && !apiKey.isBlank()) {
                logger.info("Authenticating using API key");
                client = new ChatCompletionsClientBuilder()
                    .credential(new AzureKeyCredential(apiKey))
                    .endpoint(fullEndpoint)
                    .buildClient();
            } else {
                logger.info("Authenticating using DefaultAzureCredential");
                TokenCredential credential = new DefaultAzureCredentialBuilder().build();
                client = new ChatCompletionsClientBuilder()
                    .credential(credential)
                    .endpoint(fullEndpoint)
                    .buildClient();
            }

            // 5) Send a simple chat completion request
            logger.info("Sending chat completion request with prompt: {}", prompt);
            ChatCompletions completions = client.complete(prompt);

            // 6) Process the response
            String content = completions.getChoice().getMessage().getContent();
            logger.info("Received response from model");
            System.out.println("\nResponse from AI assistant:\n" + content);
        } catch (HttpResponseException e) {
            // Handle API errors
            int status = e.getResponse().getStatusCode();
            logger.error("Service error {}: {}", status, e.getMessage());
            if (status == 401 || status == 403) {
                logger.error("Authentication failed. Check API key or Azure credentials.");
            } else if (status == 404) {
                logger.error("Deployment not found. Verify deployment name and endpoint.");
            } else if (status == 429) {
                logger.error("Rate limit exceeded. Please retry later.");
            }
        } catch (Exception e) {
            // Handle all other exceptions
            logger.error("Error in chat completion: {}", e.getMessage(), e);
        }
    }
}

Ersetzen Sie YOUR-FOUNDRY-RESOURCE-NAME durch Ihre Werte:

curl --request POST --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/openai/deployments/gpt-4o/chat/completions?api-version=2024-10-21' \
-h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \
-h 'content-type: application/json' \
-d '{
        "messages": [
            {"role": "system", 
            "content": "You are a helpful writing assistant"},
            {"role": "user", 
            "content": "Write me a poem about flowers"}
        ],
        "model": "gpt-4o"
    }'

1. Geben Sie im Chat-Playground die Eingabeaufforderung ein, und wählen Sie "Senden" aus.
2. Das Modell gibt eine Antwort im Antwortbereich zurück.

import os
from dotenv import load_dotenv
from azure.identity import DefaultAzureCredential
from azure.ai.projects import AIProjectClient

load_dotenv()

print(f"Using AZURE_AI_FOUNDRY_PROJECT_ENDPOINT: {os.environ['AZURE_AI_FOUNDRY_PROJECT_ENDPOINT']}")
print(f"Using AZURE_AI_FOUNDRY_MODEL_DEPLOYMENT_NAME: {os.environ['AZURE_AI_FOUNDRY_MODEL_DEPLOYMENT_NAME']}")

project_client = AIProjectClient(
    endpoint=os.environ["AZURE_AI_FOUNDRY_PROJECT_ENDPOINT"],
    credential=DefaultAzureCredential(),
)

openai_client = project_client.get_openai_client()

response = openai_client.responses.create(
    model=os.environ["AZURE_AI_FOUNDRY_MODEL_DEPLOYMENT_NAME"],
    input="What is the size of France in square miles?",
)
print(f"Response output: {response.output_text}")

#:package Azure.AI.Projects@2.0.0-alpha.20251104.9
#:package Azure.AI.Agents@2.*-*
#:package Azure.Identity@1.*
#:package OpenAI@2.6.*
#:property PublishAot=false
#:property NoWarn=OPENAI001

using Azure.AI.Projects;
using Azure.AI.Agents;
using Azure.Identity;
using OpenAI;
using OpenAI.Responses;

string AZURE_AI_FOUNDRY_PROJECT_ENDPOINT = Environment.GetEnvironmentVariable("AZURE_AI_FOUNDRY_PROJECT_ENDPOINT")
    ?? throw new InvalidOperationException("Missing environment variable 'AZURE_AI_FOUNDRY_PROJECT_ENDPOINT'");
string MODEL_DEPLOYMENT_NAME = Environment.GetEnvironmentVariable("AZURE_AI_FOUNDRY_MODEL_DEPLOYMENT_NAME")
    ?? throw new InvalidOperationException("Missing environment variable 'AZURE_AI_FOUNDRY_MODEL_DEPLOYMENT_NAME'");
string AGENT_NAME = Environment.GetEnvironmentVariable("AZURE_AI_FOUNDRY_AGENT_NAME")
    ?? throw new InvalidOperationException("Missing environment variable 'AZURE_AI_FOUNDRY_AGENT_NAME'");

AIProjectClient projectClient = new(new Uri(AZURE_AI_FOUNDRY_PROJECT_ENDPOINT), new AzureCliCredential());
AgentClient agentClient = projectClient.GetAgentClient();
OpenAIClient openAIClient = agentClient.GetOpenAIClient();
OpenAIResponseClient responseClient = openAIClient.GetOpenAIResponseClient(MODEL_DEPLOYMENT_NAME);

ResponseCreationOptions responseCreationOptions = new();

List<ResponseItem> items = [ResponseItem.CreateUserMessageItem("What is the size of France in square miles?")];
OpenAIResponse response = await responseClient.CreateResponseAsync(items, responseCreationOptions);

Console.WriteLine(response.GetOutputText());

Ersetzen Sie YOUR-FOUNDRY-RESOURCE-NAME durch Ihre Werte:

curl -X POST https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/openai/responses?api-version=2025-11-15-preview \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $AZURE_AI_AUTH_TOKEN" \
-d '{
        "model": "gpt-4.1-mini",
        "input": "What is the size of France in square miles?"
}'

1. Nachdem das Modell bereitgestellt wurde, werden Sie automatisch von "Start " in den Abschnitt " Build " verschoben. Ihr neues Modell ist ausgewählt und steht Ihnen zur Verfügung, um es auszuprobieren.

2. Beginnen Sie mit Ihrem Modell zu chatten, z. B. "Schreiben Sie mir ein Gedicht über Blumen.".

import os
from dotenv import load_dotenv
from azure.identity import DefaultAzureCredential
from azure.ai.projects import AIProjectClient
from azure.ai.projects.models import PromptAgentDefinition

load_dotenv()

project_client = AIProjectClient(
    endpoint=os.environ["AZURE_AI_FOUNDRY_PROJECT_ENDPOINT"],
    credential=DefaultAzureCredential(),
)

agent = project_client.agents.create_version(
    agent_name=os.environ["AZURE_AI_FOUNDRY_AGENT_NAME"],
    definition=PromptAgentDefinition(
        model=os.environ["AZURE_AI_FOUNDRY_MODEL_DEPLOYMENT_NAME"],
        instructions="You are a helpful assistant that answers general questions",
    ),
)
print(f"Agent created (id: {agent.id}, name: {agent.name}, version: {agent.version})")

#:package Azure.AI.Agents@2.*-*
#:package Azure.Identity@1.*
#:property PublishAot=false
#:property NoWarn=OPENAI001

using Azure.AI.Agents;
using Azure.Identity;

string PROJECT_ENDPOINT = Environment.GetEnvironmentVariable("AZURE_AI_FOUNDRY_PROJECT_ENDPOINT")
    ?? throw new InvalidOperationException("Missing environment variable 'AZURE_AI_FOUNDRY_PROJECT_ENDPOINT'");
string MODEL_DEPLOYMENT_NAME = Environment.GetEnvironmentVariable("AZURE_AI_FOUNDRY_MODEL_DEPLOYMENT_NAME")
    ?? throw new InvalidOperationException("Missing environment variable 'AZURE_AI_FOUNDRY_MODEL_DEPLOYMENT_NAME'");
string AGENT_NAME = Environment.GetEnvironmentVariable("AZURE_AI_FOUNDRY_AGENT_NAME")
    ?? throw new InvalidOperationException("Missing environment variable 'AZURE_AI_FOUNDRY_AGENT_NAME'");

AgentClient agentClient = new(new Uri(PROJECT_ENDPOINT), new AzureCliCredential(),);

AgentDefinition agentDefinition = new PromptAgentDefinition(MODEL_DEPLOYMENT_NAME)
{
    Instructions = "You are a helpful assistant that answers general questions",
};

AgentVersion newAgentVersion = agentClient.CreateAgentVersion(
    AGENT_NAME,
    options: new(agentDefinition));

var agentVersions = agentClient.GetAgentVersions(AGENT_NAME);
foreach (AgentVersion oneAgentVersion in agentVersions)
{
    Console.WriteLine($"Agent: {oneAgentVersion.Id}, Name: {oneAgentVersion.Name}, Version: {oneAgentVersion.Version}");
}

Ersetzen Sie YOUR-FOUNDRY-RESOURCE-NAME durch Ihre Werte:

curl -X POST https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/agents?api-version=2025-11-15-preview \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $AZURE_AI_AUTH_TOKEN" \
  -d '{
        "name": "MyAgent",
        "definition": {
            "kind": "prompt",
            "model": "gpt-4.1-mini", 
            "instructions": "You are a helpful assistant that answers general questions"
        }
    }'

Erstellen Sie nun einen Agent und interagieren Sie damit.

1. Während Sie immer noch im Abschnitt Build sind, wählen Sie im linken Bereich Agents aus.
2. Wählen Sie "Agent erstellen" aus, und geben Sie ihm einen Namen.

Ersetzen Sie den endpoint in diesem Code durch Ihren Endpunkt:

from azure.ai.projects import AIProjectClient
from azure.identity import DefaultAzureCredential
from azure.ai.agents.models import ListSortOrder, FilePurpose

project = AIProjectClient(
    endpoint="https://your-foundry-resource-name.ai.azure.com/api/projects/project-name",
    credential=DefaultAzureCredential(),
)

agent = project.agents.create_agent(
    model="gpt-4o",
    name="my-agent",
    instructions="You are a helpful writing assistant")

thread = project.agents.threads.create()
message = project.agents.messages.create(
    thread_id=thread.id, 
    role="user", 
    content="Write me a poem about flowers")

run = project.agents.runs.create_and_process(thread_id=thread.id, agent_id=agent.id)
if run.status == "failed":
    # Check if you got "Rate limit is exceeded.", then you want to get more quota
    print(f"Run failed: {run.last_error}")

# Get messages from the thread
messages = project.agents.messages.list(thread_id=thread.id)

# Get the last message from the sender
messages = project.agents.messages.list(thread_id=thread.id, order=ListSortOrder.ASCENDING)
for message in messages:
    if message.run_id == run.id and message.text_messages:
        print(f"{message.role}: {message.text_messages[-1].text.value}")

# Delete the agent once done
project.agents.delete_agent(agent.id)
print("Deleted agent")

using Azure;
using Azure.Identity;
using Azure.AI.Agents.Persistent;

// Creating the Client for agents
var projectEndpoint = System.Environment.GetEnvironmentVariable("AZURE_AI_ENDPOINT");
var modelDeploymentName = System.Environment.GetEnvironmentVariable("AZURE_AI_MODEL");
PersistentAgentsClient client = new(projectEndpoint, new DefaultAzureCredential());

// Create an Agent with toolResources and process Agent run
PersistentAgent agent = client.Administration.CreateAgent(
        model: modelDeploymentName,
        name: "SDK Test Agent - Tutor",
        instructions: "You are a personal electronics tutor. Write and run code to answer questions.",
        tools: new List<ToolDefinition> { new CodeInterpreterToolDefinition() });

// Create thread for communication
PersistentAgentThread thread = client.Threads.CreateThread();

// Create message to thread
PersistentThreadMessage messageResponse = client.Messages.CreateMessage(
    thread.Id,
    MessageRole.User,
    "I need to solve the equation `3x + 11 = 14`. Can you help me?");

// Run the Agent
ThreadRun run = client.Runs.CreateRun(thread, agent);

// Wait for the run to complete
do
{
    Thread.Sleep(TimeSpan.FromMilliseconds(500));
    run = client.Runs.GetRun(thread.Id, run.Id);
}
while (run.Status == RunStatus.Queued
    || run.Status == RunStatus.InProgress);
Pageable<PersistentThreadMessage> messages = client.Messages.GetMessages(
    threadId: thread.Id,
    order: ListSortOrder.Ascending
);
// Print the messages in the thread
WriteMessages(messages);

// Delete the thread and agent after use
client.Threads.DeleteThread(thread.Id);
client.Administration.DeleteAgent(agent.Id);

// Temporary function to use a list of messages in the thread and write them to the console.
static void WriteMessages(IEnumerable<PersistentThreadMessage> messages)
{
    foreach (PersistentThreadMessage threadMessage in messages)
    {
        Console.Write($"{threadMessage.CreatedAt:yyyy-MM-dd HH:mm:ss} - {threadMessage.Role,10}: ");
        foreach (MessageContent contentItem in threadMessage.ContentItems)
        {
            if (contentItem is MessageTextContent textItem)
            {
                Console.Write(textItem.Text);
            }
            else if (contentItem is MessageImageFileContent imageFileItem)
            {
                Console.Write($"<image from ID: {imageFileItem.FileId}");
            }
            Console.WriteLine();
        }
    }
}

const endpoint = process.env.PROJECT_ENDPOINT as string;
const deployment = process.env.MODEL_DEPLOYMENT_NAME || 'gpt-4o';
const client = new AIProjectClient(endpoint, new DefaultAzureCredential());

// Create an Agent
const agent = await client.agents.createAgent(deployment, {
    name: 'my-agent',
    instructions: 'You are a helpful agent'
});
console.log(`\n==================== 🕵️  POEM AGENT ====================`);

// Create a thread and message
const thread = await client.agents.threads.create();
const prompt = 'Write me a poem about flowers';
console.log(`\n---------------- 📝 User Prompt ---------------- \n${prompt}`);
await client.agents.messages.create(thread.id, 'user', prompt);

// Create run
let run = await client.agents.runs.create(thread.id, agent.id);

// Wait for run to complete
console.log(`\n---------------- 🚦 Run Status ----------------`);
while (['queued', 'in_progress', 'requires_action'].includes(run.status)) {
    // Avoid adding a lot of messages to the console
    await new Promise((resolve) => setTimeout(resolve, 1000));
    run = await client.agents.runs.get(thread.id, run.id);
    console.log(`Run status: ${run.status}`);
}

console.log('\n---------------- 📊 Token Usage ----------------');
console.table([run.usage]);

const messagesIterator = await client.agents.messages.list(thread.id);
const assistantMessage = await getAssistantMessage(messagesIterator);
console.log('\n---------------- 💬 Response ----------------');
printAssistantMessage(assistantMessage);

// Clean up
console.log(`\n---------------- 🧹 Clean Up Poem Agent ----------------`);
await client.agents.deleteAgent(agent.id);
console.log(`Deleted Agent, Agent ID: ${agent.id}`);

package com.azure.ai.foundry.samples;

import com.azure.ai.agents.persistent.PersistentAgentsClient;
import com.azure.ai.agents.persistent.PersistentAgentsClientBuilder;
import com.azure.ai.agents.persistent.PersistentAgentsAdministrationClient;
import com.azure.ai.agents.persistent.models.CreateAgentOptions;
import com.azure.ai.agents.persistent.models.CreateThreadAndRunOptions;
import com.azure.ai.agents.persistent.models.PersistentAgent;
import com.azure.ai.agents.persistent.models.ThreadRun;
import com.azure.core.credential.TokenCredential;
import com.azure.core.exception.HttpResponseException;
import com.azure.core.util.logging.ClientLogger;
import com.azure.identity.DefaultAzureCredentialBuilder;


/**
 * Sample demonstrating how to work with Azure AI Agents using the Azure AI Agents Persistent SDK.
 * 
 * This sample shows how to:
 * - Set up authentication with Azure credentials
 * - Create a persistent agent with custom instructions
 * - Start a thread and run with the agent
 * - Access various properties of the agent and thread run
 * - Work with the PersistentAgentsClient and PersistentAgentsAdministrationClient
 * 
 * Environment variables:
 * - AZURE_ENDPOINT: Optional fallback. The base endpoint for your Azure AI service if PROJECT_ENDPOINT is not provided.
 * - PROJECT_ENDPOINT: Required. The endpoint for your Azure AI Project.
 * - MODEL_DEPLOYMENT_NAME: Optional. The model deployment name (defaults to "gpt-4o").
 * - AGENT_NAME: Optional. The name to give to the created agent (defaults to "java-quickstart-agent").
 * - AGENT_INSTRUCTIONS: Optional. The instructions for the agent (defaults to a helpful assistant).
 * 
 * Note: This sample requires proper Azure authentication. It uses DefaultAzureCredential which supports
 * multiple authentication methods including environment variables, managed identities, and interactive login.
 * 
 * SDK Features Demonstrated:
 * - Using the Azure AI Agents Persistent SDK (com.azure:azure-ai-agents-persistent:1.0.0-beta.2)
 * - Creating an authenticated client with DefaultAzureCredential
 * - Using the PersistentAgentsClientBuilder pattern for client instantiation
 * - Working with the PersistentAgentsAdministrationClient for agent management
 * - Creating agents with specific configurations (name, model, instructions)
 * - Starting threads and runs for agent conversations
 * - Working with agent state and thread management
 * - Accessing agent and thread run properties
 * - Implementing proper error handling for Azure service interactions
 */
public class AgentSample {
    private static final ClientLogger logger = new ClientLogger(AgentSample.class);

    public static void main(String[] args) {
        // Load environment variables with better error handling, supporting both .env and system environment variables
        String endpoint = System.getenv("AZURE_ENDPOINT");
        String projectEndpoint = System.getenv("PROJECT_ENDPOINT");
        String modelName = System.getenv("MODEL_DEPLOYMENT_NAME");
        String agentName = System.getenv("AGENT_NAME");
        String instructions = System.getenv("AGENT_INSTRUCTIONS");

        

        // Check for required endpoint configuration
        if (projectEndpoint == null && endpoint == null) {
            String errorMessage = "Environment variables not configured. Required: either PROJECT_ENDPOINT or AZURE_ENDPOINT must be set.";
            logger.error("ERROR: {}", errorMessage);
            logger.error("Please set your environment variables or create a .env file. See README.md for details.");
            return;
        }
        
        // Use AZURE_ENDPOINT as fallback if PROJECT_ENDPOINT not set
        if (projectEndpoint == null) {
            projectEndpoint = endpoint;
            logger.info("Using AZURE_ENDPOINT as PROJECT_ENDPOINT: {}", projectEndpoint);
        }

        // Set defaults for optional parameters with informative logging
        if (modelName == null) {
            modelName = "gpt-4o";
            logger.info("No MODEL_DEPLOYMENT_NAME provided, using default: {}", modelName);
        }
        if (agentName == null) {
            agentName = "java-quickstart-agent";
            logger.info("No AGENT_NAME provided, using default: {}", agentName);
        }
        if (instructions == null) {
            instructions = "You are a helpful assistant that provides clear and concise information.";
            logger.info("No AGENT_INSTRUCTIONS provided, using default instructions");
        }

        // Create Azure credential with DefaultAzureCredentialBuilder
        // This supports multiple authentication methods including environment variables,
        // managed identities, and interactive browser login
        logger.info("Building DefaultAzureCredential");
        TokenCredential credential = new DefaultAzureCredentialBuilder().build();

        try {
            // Build the general agents client
            logger.info("Creating PersistentAgentsClient with endpoint: {}", projectEndpoint);
            PersistentAgentsClient agentsClient = new PersistentAgentsClientBuilder()
                .endpoint(projectEndpoint)
                .credential(credential)
                .buildClient();

            // Derive the administration client
            logger.info("Getting PersistentAgentsAdministrationClient");
            PersistentAgentsAdministrationClient adminClient =
                agentsClient.getPersistentAgentsAdministrationClient();

            // Create an agent
            logger.info("Creating agent with name: {}, model: {}", agentName, modelName);
            PersistentAgent agent = adminClient.createAgent(
                new CreateAgentOptions(modelName)
                    .setName(agentName)
                    .setInstructions(instructions)
            );
            logger.info("Agent created: ID={}, Name={}", agent.getId(), agent.getName());
            logger.info("Agent model: {}", agent.getModel());

            // Start a thread/run on the general client
            logger.info("Creating thread and run with agent ID: {}", agent.getId());
            ThreadRun runResult = agentsClient.createThreadAndRun(
                new CreateThreadAndRunOptions(agent.getId())
            );
            logger.info("ThreadRun created: ThreadId={}", runResult.getThreadId());

            // List available getters on ThreadRun for informational purposes
            logger.info("\nAvailable getters on ThreadRun:");
            for (var method : ThreadRun.class.getMethods()) {
                if (method.getName().startsWith("get")) {
                    logger.info(" - {}", method.getName());
                }
            }

            logger.info("\nDemo completed successfully!");
            
        } catch (HttpResponseException e) {
            // Handle service-specific errors with detailed information
            int statusCode = e.getResponse().getStatusCode();
            logger.error("Service error {}: {}", statusCode, e.getMessage());
            logger.error("Refer to the Azure AI Agents documentation for troubleshooting information.");
        } catch (Exception e) {
            // Handle general exceptions
            logger.error("Error in agent sample: {}", e.getMessage(), e);
        }
    }
}

Ersetzen Sie YOUR-FOUNDRY-RESOURCE-NAME und YOUR-PROJECT-NAME durch Ihre Werte:

# Create agent
curl --request POST --url "https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/assistants?api-version=v1" \
    -h "authorization: Bearer $AZURE_AI_AUTH_TOKEN" \
    -h "content-type: application/json" \
    -d '{
            "model": "gpt-4o",
            "name": "my-agent",
            "instructions": "You are a helpful writing assistant"
        }'
#Lets say agent ID created is asst_123456789. Use this to run the agent

# Create thread
curl --request POST --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/threads?api-version=v1' \
    -h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \
    -h 'content-type: application/json'

#Lets say thread ID created is thread_123456789. Use this in the next step

# Create message using thread ID
curl --request POST --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/threads/thread_123456789/messages?api-version=v1' \
    -h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \
    -h 'content-type: application/json' \
    -d '{
            "role": "user",
            "content": "Write me a poem about flowers"
        }'

# Run thread with the agent - use both agent id and thread id
curl --request POST --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/threads/thread_123456789/runs?api-version=v1' \
    -h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \
    -h 'content-type: application/json' \
    --data '{
        "assistant_id": "asst_123456789"
    }'

# List the messages in the thread using thread ID
curl --request GET --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/threads/thread_123456789/messages?api-version=v1' \
    -h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \
    -h 'content-type: application/json'

# Delete agent once done using agent id
curl --request DELETE --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/assistants/asst_123456789?api-version=v1' \
    -h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \
    -h 'content-type: application/json'

Wenn Sie bereit sind, einen Agent zu testen, wird ein Standard-Agent für Sie erstellt. So chatten Sie mit diesem Agent:

1. Wählen Sie im linken Bereich " Playgrounds" aus.
2. Wählen Sie auf der Agents-Playgroundkarte"Los geht's" aus.
3. Fügen Sie Anweisungen hinzu, z. B. "Sie sind ein hilfreicher Schreibassistent.".
4. Beginnen Sie mit Ihrem Agenten zu chatten, z. B. "Schreiben Sie mir ein Gedicht über Blumen.".

import os
from dotenv import load_dotenv
from azure.identity import DefaultAzureCredential
from azure.ai.projects import AIProjectClient

load_dotenv()

project_client = AIProjectClient(
    endpoint=os.environ["AZURE_AI_FOUNDRY_PROJECT_ENDPOINT"],
    credential=DefaultAzureCredential(),
)

agent_name = os.environ["AZURE_AI_FOUNDRY_AGENT_NAME"]
openai_client = project_client.get_openai_client()

# Optional Step: Create a conversation to use with the agent
conversation = openai_client.conversations.create()
print(f"Created conversation (id: {conversation.id})")

# Chat with the agent to answer questions
response = openai_client.responses.create(
    conversation=conversation.id, #Optional conversation context for multi-turn
    extra_body={"agent": {"name": agent_name, "type": "agent_reference"}},
    input="What is the size of France in square miles?",
)
print(f"Response output: {response.output_text}")

# Optional Step: Ask a follow-up question in the same conversation
response = openai_client.responses.create(
    conversation=conversation.id,
    extra_body={"agent": {"name": agent_name, "type": "agent_reference"}},
    input="And what is the capital city?",
)
print(f"Response output: {response.output_text}")

#:package Azure.AI.Projects@2.0.0-alpha.20251104.9
#:package Azure.AI.Agents@2.*-*
#:package Azure.Identity@1.*
#:package OpenAI@2.6.*
#:property PublishAot=false
#:property NoWarn=OPENAI001

using Azure.AI.Projects;
using Azure.AI.Agents;
using Azure.Identity;
using OpenAI;
using OpenAI.Responses;

string AZURE_AI_FOUNDRY_PROJECT_ENDPOINT = Environment.GetEnvironmentVariable("AZURE_AI_FOUNDRY_PROJECT_ENDPOINT")
    ?? throw new InvalidOperationException("Missing environment variable 'AZURE_AI_FOUNDRY_PROJECT_ENDPOINT'");
string MODEL_DEPLOYMENT_NAME = Environment.GetEnvironmentVariable("AZURE_AI_FOUNDRY_MODEL_DEPLOYMENT_NAME")
    ?? throw new InvalidOperationException("Missing environment variable 'AZURE_AI_FOUNDRY_MODEL_DEPLOYMENT_NAME'");
string AGENT_NAME = Environment.GetEnvironmentVariable("AZURE_AI_FOUNDRY_AGENT_NAME")
    ?? throw new InvalidOperationException("Missing environment variable 'AZURE_AI_FOUNDRY_AGENT_NAME'");

AIProjectClient projectClient = new(new Uri(AZURE_AI_FOUNDRY_PROJECT_ENDPOINT), new AzureCliCredential());
AgentClient agentClient = projectClient.GetAgentClient();
OpenAIClient openAIClient = agentClient.GetOpenAIClient();
OpenAIResponseClient responseClient = openAIClient.GetOpenAIResponseClient(MODEL_DEPLOYMENT_NAME);
// Optional Step: Create a conversation to use with the agent
ConversationClient conversations = agentClient.GetConversationClient();
AgentConversation conversation = conversations.CreateConversation();

ResponseCreationOptions responseCreationOptions = new();
responseCreationOptions.SetAgentReference(new AgentReference(AGENT_NAME));
responseCreationOptions.SetConversationReference(conversation.Id);
// Chat with the agent to answer questions
OpenAIResponse response = responseClient.CreateResponse(
    [ResponseItem.CreateUserMessageItem("What is the size of France in square miles?")],
    responseCreationOptions);

Console.WriteLine(response.GetOutputText());
// Optional Step: Ask a follow-up question in the same conversation
response = responseClient.CreateResponse(
    [ResponseItem.CreateUserMessageItem("And what is the capital city?")],
    responseCreationOptions);

Console.WriteLine(response.GetOutputText());

Ersetzen Sie YOUR-FOUNDRY-RESOURCE-NAME durch Ihre Werte:

# Optional Step: Create a conversation to use with the agent
curl -X POST https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/openai/conversations?api-version=2025-11-15-preview \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $AZURE_AI_AUTH_TOKEN" \
  -d '{}'
# Lets say Conversation ID created is conv_123456789. Use this in the next step

#Chat with the agent to answer questions
curl -X POST https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/openai/responses?api-version=2025-11-15-preview \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $AZURE_AI_AUTH_TOKEN" \
  -d '{
        "agent": {"type": "agent_reference", "name": "MyAgent"},
        "conversation" : "<YOUR_CONVERSATION_ID>",
        "input" : "What is the size of France in square miles?"
    }'

#Optional Step: Ask a follow-up question in the same conversation
curl -X POST https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/openai/responses?api-version=2025-11-15-preview \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $AZURE_AI_AUTH_TOKEN" \
  -d '{
        "agent": {"type": "agent_reference", "name": "MyAgent"},
        "conversation" : "<YOUR_CONVERSATION_ID>",
        "input" : "And what is the capital city?"
    }'

Interagieren Sie mit Ihrem Agenten.

1. Fügen Sie Anweisungen hinzu, z. B. "Sie sind ein hilfreicher Schreibassistent.".
2. Beginnen Sie mit Ihrem Agenten zu chatten, z. B. "Schreiben Sie ein Gedicht über die Sonne".
3. Fragen Sie anschließend nach „Wie wäre es mit einem Haiku?“

Ersetzen Sie den endpoint in diesem Code durch Ihren Endpunkt:

from azure.ai.projects import AIProjectClient
from azure.identity import DefaultAzureCredential
from azure.ai.agents.models import ListSortOrder, FileSearchTool

project = AIProjectClient(
    endpoint="https://your-foundry-resource-name.ai.azure.com/api/projects/project-name",
    credential=DefaultAzureCredential(),
)

# Upload file and create vector store
file = project.agents.files.upload(file_path="./product_info_1.md", purpose=FilePurpose.AGENTS)
vector_store = project.agents.vector_stores.create_and_poll(file_ids=[file.id], name="my_vectorstore")

# Create file search tool and agent
file_search = FileSearchTool(vector_store_ids=[vector_store.id])
agent = project.agents.create_agent(
    model="gpt-4o",
    name="my-assistant",
    instructions="You are a helpful assistant and can search information from uploaded files",
    tools=file_search.definitions,
    tool_resources=file_search.resources,
)

# Create thread and process user message
thread = project.agents.threads.create()
project.agents.messages.create(thread_id=thread.id, role="user", content="Hello, what Contoso products do you know?")
run = project.agents.runs.create_and_process(thread_id=thread.id, agent_id=agent.id)

# Handle run status
if run.status == "failed":
    print(f"Run failed: {run.last_error}")

# Print thread messages
messages = project.agents.messages.list(thread_id=thread.id, order=ListSortOrder.ASCENDING)
for message in messages:
    if message.run_id == run.id and message.text_messages:
        print(f"{message.role}: {message.text_messages[-1].text.value}")

# Cleanup resources
project.agents.vector_stores.delete(vector_store.id)
project.agents.files.delete(file_id=file.id)
project.agents.delete_agent(agent.id)

using Azure;
using Azure.Identity;
using Azure.AI.Agents.Persistent;

// Creating the Client for agents and vector stores
var projectEndpoint = System.Environment.GetEnvironmentVariable("AZURE_AI_ENDPOINT");
var modelDeploymentName = System.Environment.GetEnvironmentVariable("AZURE_AI_MODEL");
PersistentAgentsClient client = new(projectEndpoint, new DefaultAzureCredential());

PersistentAgentFileInfo uploadedAgentFile = client.Files.UploadFile(
    filePath: "product_info_1.md",
    purpose: PersistentAgentFilePurpose.Agents);

// Create a vector store with the file and wait for it to be processed.
// If you do not specify a vector store, create_message will create a vector store with a default expiration policy of seven days after they were last active

Dictionary<string, string> fileIds = new()
{
    { uploadedAgentFile.Id, uploadedAgentFile.Filename }
};

PersistentAgentsVectorStore vectorStore = client.VectorStores.CreateVectorStore(
    name: "my_vector_store");

// Add file ID to vector store.
VectorStoreFile vctFile = client.VectorStores.CreateVectorStoreFile(
    vectorStoreId: vectorStore.Id,
    fileId: uploadedAgentFile.Id
);

Console.WriteLine($"Added file to vector store. The id file in the vector store is {vctFile.Id}.");

FileSearchToolResource fileSearchToolResource = new FileSearchToolResource();
fileSearchToolResource.VectorStoreIds.Add(vectorStore.Id);

// Create an Agent with toolResources and process Agent run
PersistentAgent agent = client.Administration.CreateAgent(
        model: modelDeploymentName,
        name: "SDK Test Agent - Retrieval",
        instructions: "You are a helpful agent that can help fetch data from files you know about.",
        tools: new List<ToolDefinition> { new FileSearchToolDefinition() },
        toolResources: new ToolResources() { FileSearch = fileSearchToolResource });

// Create thread for communication
PersistentAgentThread thread = client.Threads.CreateThread();

// Create message to thread
PersistentThreadMessage messageResponse = client.Messages.CreateMessage(
    thread.Id,
    MessageRole.User,
    "Can you give me information on how to mount the product?");

// Run the Agent
ThreadRun run = client.Runs.CreateRun(thread, agent);

// Wait for the run to complete
// This is a blocking call, so it will wait until the run is completed
do
{
    Thread.Sleep(TimeSpan.FromMilliseconds(500));
    run = client.Runs.GetRun(thread.Id, run.Id);
}
while (run.Status == RunStatus.Queued
    || run.Status == RunStatus.InProgress);

// Create a list of messages in the thread and write them to the console.
Pageable<PersistentThreadMessage> messages = client.Messages.GetMessages(
    threadId: thread.Id,
    order: ListSortOrder.Ascending
);
WriteMessages(messages, fileIds);

// Delete the thread and agent after use
client.VectorStores.DeleteVectorStore(vectorStore.Id);
client.Files.DeleteFile(uploadedAgentFile.Id);
client.Threads.DeleteThread(thread.Id);
client.Administration.DeleteAgent(agent.Id);

// Helper method to write messages to the console
static void WriteMessages(IEnumerable<PersistentThreadMessage> messages, Dictionary<string, string> fileIds)
{
    foreach (PersistentThreadMessage threadMessage in messages)
    {
        Console.Write($"{threadMessage.CreatedAt:yyyy-MM-dd HH:mm:ss} - {threadMessage.Role,10}: ");
        foreach (MessageContent contentItem in threadMessage.ContentItems)
        {
            if (contentItem is MessageTextContent textItem)
            {
                if (threadMessage.Role == MessageRole.Agent && textItem.Annotations.Count > 0)
                {
                    string strMessage = textItem.Text;
                    foreach (MessageTextAnnotation annotation in textItem.Annotations)
                    {
                        if (annotation is MessageTextFilePathAnnotation pathAnnotation)
                        {
                            strMessage = replaceReferences(fileIds, pathAnnotation.FileId, pathAnnotation.Text, strMessage);
                        }
                        else if (annotation is MessageTextFileCitationAnnotation citationAnnotation)
                        {
                            strMessage = replaceReferences(fileIds, citationAnnotation.FileId, citationAnnotation.Text, strMessage);
                        }
                    }
                    Console.Write(strMessage);
                }
                else
                {
                    Console.Write(textItem.Text);
                }
            }
            else if (contentItem is MessageImageFileContent imageFileItem)
            {
                Console.Write($"<image from ID: {imageFileItem.FileId}");
            }
            Console.WriteLine();
        }
    }
}

// Helper method to replace file references in the text
static string replaceReferences(Dictionary<string, string> fileIds, string fileID, string placeholder, string text)
{
    if (fileIds.TryGetValue(fileID, out string replacement))
        return text.Replace(placeholder, $" [{replacement}]");
    else
        return text.Replace(placeholder, $" [{fileID}]");
}

// Upload a file named product_info_1.md
console.log(`\n==================== 🕵️  FILE AGENT ====================`);
const __dirname = path.dirname(fileURLToPath(import.meta.url));
const filePath = path.join(__dirname, '../data/product_info_1.md');
const fileStream = fs.createReadStream(filePath);
fileStream.on('data', (chunk: string | Buffer) => {
    console.log(`Read ${chunk.length} bytes of data.`);
});
const file = await client.agents.files.upload(fileStream, 'assistants', {
    fileName: 'product_info_1.md'
});
console.log(`Uploaded file, ID: ${file.id}`);
const vectorStore = await client.agents.vectorStores.create({
    fileIds: [file.id], // Associate the uploaded file with the vector store
    name: 'my_vectorstore'
});
console.log('\n---------------- 🗃️ Vector Store Info ----------------');
console.table([
    {
        'Vector Store ID': vectorStore.id,
        'Usage (bytes)': vectorStore.usageBytes,
        'File Count': vectorStore.fileCounts?.total ?? 'N/A'
    }
]);

// Create an Agent and a FileSearch tool
const fileSearchTool = ToolUtility.createFileSearchTool([vectorStore.id]);
const fileAgent = await client.agents.createAgent(deployment, {
    name: 'my-file-agent',
    instructions: 'You are a helpful assistant and can search information from uploaded files',
    tools: [fileSearchTool.definition],
    toolResources: fileSearchTool.resources
});

// Create a thread and message
const fileSearchThread = await client.agents.threads.create({ toolResources: fileSearchTool.resources });
const filePrompt = 'What are the steps to setup the TrailMaster X4 Tent?';
console.log(`\n---------------- 📝 User Prompt ---------------- \n${filePrompt}`);
await client.agents.messages.create(fileSearchThread.id, 'user', filePrompt);

// Create run
let fileSearchRun = await client.agents.runs.create(fileSearchThread.id, fileAgent.id).stream();

for await (const eventMessage of fileSearchRun) {
    if (eventMessage.event === DoneEvent.Done) {
        console.log(`Run completed: ${eventMessage.data}`);
    }
    if (eventMessage.event === ErrorEvent.Error) {
        console.log(`An error occurred. ${eventMessage.data}`);
    }
}

const fileSearchMessagesIterator = await client.agents.messages.list(fileSearchThread.id);
const fileAssistantMessage = await getAssistantMessage(fileSearchMessagesIterator);
console.log(`\n---------------- 💬 Response ---------------- \n`);
printAssistantMessage(fileAssistantMessage);

// Clean up
console.log(`\n---------------- 🧹 Clean Up File Agent ----------------`);
client.agents.vectorStores.delete(vectorStore.id);
client.agents.files.delete(file.id);
client.agents.deleteAgent(fileAgent.id);
console.log(`Deleted VectorStore, File, and FileAgent. FileAgent ID: ${fileAgent.id}`);

package com.azure.ai.foundry.samples;

import java.io.IOException;
import java.nio.file.Files;
import java.nio.file.Path;

import com.azure.ai.agents.persistent.PersistentAgentsClient;
import com.azure.ai.agents.persistent.PersistentAgentsClientBuilder;
import com.azure.ai.agents.persistent.PersistentAgentsAdministrationClient;
import com.azure.ai.agents.persistent.models.CreateAgentOptions;
import com.azure.ai.agents.persistent.models.CreateThreadAndRunOptions;
import com.azure.ai.agents.persistent.models.PersistentAgent;
import com.azure.ai.agents.persistent.models.ThreadRun;
import com.azure.core.exception.HttpResponseException;
import com.azure.core.util.logging.ClientLogger;
import com.azure.identity.DefaultAzureCredentialBuilder;

/**
 * Sample demonstrating agent creation with document capabilities using Azure AI Agents Persistent SDK.
 * 
 * This sample shows how to:
 * - Set up authentication with Azure credentials
 * - Create a temporary document file for demonstration purposes
 * - Create a persistent agent with custom instructions for document search
 * - Start a thread and run with the agent that can access document content
 * - Work with file-based knowledge sources for agent interactions
 * 
 * Environment variables:
 * - AZURE_ENDPOINT: Optional fallback. The base endpoint for your Azure AI service if PROJECT_ENDPOINT is not provided.
 * - PROJECT_ENDPOINT: Required. The endpoint for your Azure AI Project.
 * - MODEL_DEPLOYMENT_NAME: Optional. The model deployment name (defaults to "gpt-4o").
 * - AGENT_NAME: Optional. The name to give to the created agent (defaults to "java-file-search-agent").
 * - AGENT_INSTRUCTIONS: Optional. The instructions for the agent (defaults to document-focused instructions).
 * 
 * Note: This sample demonstrates the creation of an agent that can process document content.
 * In a real-world scenario, you might want to integrate with Azure AI Search or similar services
 * for more advanced document processing capabilities.
 * 
 * SDK Features Demonstrated:
 * - Using the Azure AI Agents Persistent SDK (com.azure:azure-ai-agents-persistent:1.0.0-beta.2)
 * - Creating an authenticated client with DefaultAzureCredential
 * - Using the PersistentAgentsClientBuilder for client instantiation 
 * - Working with the PersistentAgentsAdministrationClient for agent management
 * - Creating temporary document files for agent access
 * - Adding document knowledge sources to agents
 * - Creating document-aware agents that can search and reference content
 * - Starting threads and runs for document-based Q&A
 * - Error handling for Azure service and file operations
 */
public class FileSearchAgentSample {
    private static final ClientLogger logger = new ClientLogger(FileSearchAgentSample.class);
    
    public static void main(String[] args) {
        // Load environment variables with proper error handling
        String endpoint = System.getenv("AZURE_ENDPOINT");
        String projectEndpoint = System.getenv("PROJECT_ENDPOINT");
        String modelName = System.getenv("MODEL_DEPLOYMENT_NAME");
        String agentName = System.getenv("AGENT_NAME");
        String instructions = System.getenv("AGENT_INSTRUCTIONS");

        // Check for required endpoint configuration
        if (projectEndpoint == null && endpoint == null) {
            String errorMessage = "Environment variables not configured. Required: either PROJECT_ENDPOINT or AZURE_ENDPOINT must be set.";
            logger.error("ERROR: {}", errorMessage);
            logger.error("Please set your environment variables or create a .env file. See README.md for details.");
            return;
        }
        
        // Set defaults for optional parameters
        if (modelName == null) {
            modelName = "gpt-4o";
            logger.info("No MODEL_DEPLOYMENT_NAME provided, using default: {}", modelName);
        }
        if (agentName == null) {
            agentName = "java-file-search-agent";
            logger.info("No AGENT_NAME provided, using default: {}", agentName);
        }
        if (instructions == null) {
            instructions = "You are a helpful assistant that can answer questions about documents.";
            logger.info("No AGENT_INSTRUCTIONS provided, using default instructions: {}", instructions);
        }

        logger.info("Building DefaultAzureCredential");
        var credential = new DefaultAzureCredentialBuilder().build();

        // Use AZURE_ENDPOINT as fallback if PROJECT_ENDPOINT not set
        String finalEndpoint = projectEndpoint != null ? projectEndpoint : endpoint;
        logger.info("Using endpoint: {}", finalEndpoint);

        try {
            // Build the general agents client with proper error handling
            logger.info("Creating PersistentAgentsClient with endpoint: {}", finalEndpoint);
            PersistentAgentsClient agentsClient = new PersistentAgentsClientBuilder()
                .endpoint(finalEndpoint)
                .credential(credential)
                .buildClient();

            // Derive the administration client
            logger.info("Getting PersistentAgentsAdministrationClient");
            PersistentAgentsAdministrationClient adminClient =
                agentsClient.getPersistentAgentsAdministrationClient();

            // Create sample document for demonstration
            Path tmpFile = createSampleDocument();
            logger.info("Created sample document at: {}", tmpFile);
            String filePreview = Files.readString(tmpFile).substring(0, 200) + "...";
            logger.info("{}", filePreview);

            // Create the agent with proper configuration
            logger.info("Creating agent with name: {}, model: {}", agentName, modelName);
            PersistentAgent agent = adminClient.createAgent(
                new CreateAgentOptions(modelName)
                    .setName(agentName)
                    .setInstructions(instructions)
            );
            logger.info("Agent ID: {}", agent.getId());
            logger.info("Agent model: {}", agent.getModel());

            // Start a thread and run on the general client
            logger.info("Creating thread and run with agent ID: {}", agent.getId());
            ThreadRun threadRun = agentsClient.createThreadAndRun(
                new CreateThreadAndRunOptions(agent.getId())
            );
            logger.info("ThreadRun ID: {}", threadRun.getThreadId());

            // Display success message
            logger.info("\nDemo completed successfully!");

        } catch (HttpResponseException e) {
            // Handle service-specific errors with detailed information
            int statusCode = e.getResponse().getStatusCode();
            logger.error("Service error {}: {}", statusCode, e.getMessage());
            logger.error("Refer to the Azure AI Agents documentation for troubleshooting information.");
            
        } catch (IOException e) {
            // Handle IO exceptions specifically for file operations
            logger.error("I/O error while creating sample document: {}", e.getMessage(), e);
            
        } catch (Exception e) {
            // Handle general exceptions
            logger.error("Error in file search agent sample: {}", e.getMessage(), e);
        }
    }

    /**
     * Creates a sample markdown document with cloud computing information.
     * 
     * This method demonstrates:
     * - Creating a temporary file that will be automatically deleted when the JVM exits
     * - Writing structured markdown content to the file
     * - Logging file creation and preview of content
     * 
     * In a real application, you might read existing files or create more complex documents.
     * You could also upload them to a document storage service for persistent access.
     * 
     * @return Path to the created temporary file
     * @throws IOException if an I/O error occurs during file creation or writing
     */
    private static Path createSampleDocument() throws IOException {
        logger.info("Creating sample document");
        String content = """
            # Cloud Computing Overview
            
            Cloud computing is the delivery of computing services over the internet, including servers, storage,
            databases, networking, software, analytics, and intelligence. Cloud services offer faster innovation,
            flexible resources, and economies of scale.
            
            ## Key Cloud Service Models
            
            1. **Infrastructure as a Service (IaaS)** - Provides virtualized computing resources
            2. **Platform as a Service (PaaS)** - Provides hardware and software tools over the internet
            3. **Software as a Service (SaaS)** - Delivers software applications over the internet
            
            ## Major Cloud Providers
            
            - Microsoft Azure
            - Amazon Web Services (AWS)
            - Google Cloud Platform (GCP)
            - IBM Cloud
            
            ## Benefits of Cloud Computing
            
            - Cost efficiency
            - Scalability
            - Reliability
            - Performance
            - Security
            """;
        
        Path tempFile = Files.createTempFile("cloud-doc", ".md");
        Files.writeString(tempFile, content);
        logger.info("Sample document created at: {}", tempFile);
        return tempFile;
    }
}

Ersetzen Sie YOUR-FOUNDRY-RESOURCE-NAME und YOUR-PROJECT-NAME durch Ihre Werte:

#Upload the file
curl --request POST --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/files?api-version=v1' \ 
    -h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \ 
    -f purpose="assistant" \
    -f file="@product_info_1.md" #File object (not file name) to be uploaded.
#Lets say file ID created is assistant-123456789. Use this in the next step

# create vector store
curl --request POST --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/vector_stores?api-version=v1' \ 
-h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \ 
-h 'content-type: application/json' \ 
-d '{
        "name": "my_vectorstore",
        "file_ids": ["assistant-123456789"]
    }'
#Lets say Vector Store ID created is vs_123456789. Use this in the next step

# Create Agent for File Search
curl --request POST --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/assistants?api-version=v1' \
    -h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \ 
    -h 'content-type: application/json' \ 
    -d '{
        "model": "gpt-4o",
        "name": "my-assistant",
        "instructions": "You are a helpful assistant and can search information from uploaded files",
        "tools": [{"type": "file_search"}],
        "tool_resources": {"file_search": {"vector_store_ids": ["vs_123456789"]}}
    }'
#Lets say agent ID created is asst_123456789. Use this to run the agent

# Create thread
curl --request POST --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/threads?api-version=v1' \
    -h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \
    -h 'content-type: application/json'
#Lets say thread ID created is thread_123456789. Use this in the next step

# Create message using thread ID
curl --request POST --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/threads/thread_123456789/messages?api-version=v1' \
    -h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \
    -h 'content-type: application/json' \
    -d '{
            "role": "user",
            "content": "Hello, what Contoso products do you know?"
        }'

# Run thread with the agent - use both agent id and thread id
curl --request POST --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/threads/thread_123456789/runs?api-version=v1' \
    -h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \
    -h 'content-type: application/json' \
    --data '{
        "assistant_id": "asst_123456789"
    }'

# List the messages in the thread using thread ID
curl --request GET --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/threads/thread_123456789/messages?api-version=v1' \
    -h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \
    -h 'content-type: application/json'

# Delete agent once done using agent id
curl --request DELETE --url 'https://YOUR-FOUNDRY-RESOURCE-NAME.services.ai.azure.com/api/projects/YOUR-PROJECT-NAME/assistants/asst_123456789?api-version=v1' \
    -h 'authorization: Bearer $AZURE_AI_AUTH_TOKEN' \
    -h 'content-type: application/json'

1. Scrollen Sie im Setupbereich Ihres Agents bei Bedarf nach unten, um Wissen zu finden.
2. Wählen Sie Hinzufügen aus.
3. Wählen Sie "Dateien " aus, um die Datei product_info_1.md hochzuladen.
4. Wählen Sie unter "Dateien hinzufügen" die Option "Lokale Dateien auswählen" aus.
5. Wählen Sie "Hochladen" und "Speichern" aus.
6. Ändern Sie die Anweisungen Ihrer Agents, z. B. "Sie sind ein hilfreicher Assistent und können Informationen aus hochgeladenen Dateien durchsuchen".
7. Stellen Sie eine Frage, z. B. "Hallo, welche Contoso-Produkte wissen Sie?"
8. Um weitere Dateien hinzuzufügen, wählen Sie im AgentVectorStore die Option ... und dann "Verwalten" aus.