Set-CMHierarchySetting
Sets hierarchy settings in Configuration Manager.
Syntax
Default (Default)
Set-CMHierarchySetting
[-AllowPrestage <Boolean>]
[-ApprovalMethod <ApprovalMethodType>]
[-AutoResolveClientConflict <Boolean>]
[-AutoUpgradeDays <Int32>]
[-EnableAutoClientUpgrade <Boolean>]
[-EnableExclusionCollection <Boolean>]
[-EnablePreProduction <Boolean>]
[-EnablePrereleaseFeature]
[-ExcludeServer <Boolean>]
[-ExclusionCollection <IResultObject>]
[-ExclusionCollectionId <String>]
[-ExclusionCollectionName <String>]
[-FallbackSiteCode <String>]
[-Force]
[-PassThru]
[-PreferBoundaryGroupManagementPoint <Boolean>]
[-TargetCollection <IResultObject>]
[-TargetCollectionId <String>]
[-TargetCollectionName <String>]
[-TelemetryLevel <TelemetryLevelType>]
[-UnlimitTargetCollectionMember]
[-UseFallbackSite <Boolean>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Examples
Example 1: Modify the hierarchy setting
PS XYZ:\> Set-CMHierarchySetting -AllowPrestage -ApprovalMethod AutomaticallyApproveAllComputers
This command uses the Set-CMHierarchySetting cmdlet to modify the hierarchy setting. The command specifies the value AutomaticallyApproveAllComputers for the ApprovalMethod parameter, and also specifies the AllowPrestage parameter.
Parameters
-AllowPrestage
Indicates whether to allow prestaging.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ApprovalMethod
Specifies an approval method. Valid values are:
- AutomaticallyApproveAllComputers
- AutomaticallyApproveComputersInTrustedDomains
- ManuallyApproveEachComputer
Parameter properties
| Type: | ApprovalMethodType |
| Default value: | None |
| Accepted values: | AutomaticallyApproveComputersInTrustedDomains, ManuallyApproveEachComputer, AutomaticallyApproveAllComputers |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AutoResolveClientConflict
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | AutomaticallyResolveConfictingRecord, AutomaticallyResolveConflictingRecord |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AutoUpgradeDays
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | AutomaticallyUpgradeDays |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EnableAutoClientUpgrade
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | EnableProgram |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EnableExclusionCollection
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EnablePreProduction
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EnablePrereleaseFeature
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | EnablePrereleaseFeatures |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ExcludeServer
Indicates whether the cmdlet excludes the server.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | ExcludeServers |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ExclusionCollection
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | IResultObject |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ExclusionCollectionId
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ExclusionCollectionName
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-FallbackSiteCode
Specifies the site code for a fallback site.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Force
Forces the command to run without asking for user confirmation.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PassThru
Add this parameter to return an object that represents the item with which you're working. By default, this cmdlet may not generate any output.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PreferBoundaryGroupManagementPoint
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | PreferBoundaryGroupManagementPoints |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-TargetCollection
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | IResultObject |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | PreProductionCollection |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-TargetCollectionId
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | PreProductionCollectionId |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-TargetCollectionName
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | PreProductionCollectionName |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-TelemetryLevel
{{ Fill TelemetryLevel Description }}
Parameter properties
| Type: | TelemetryLevelType |
| Default value: | None |
| Accepted values: | Basic, Enhanced, Full |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | DiagnosticLevel |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-UnlimitTargetCollectionMember
The Set-CMHierarchySetting cmdlet sets hierarchy settings in Configuration Manager.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | UnlimitPreProductionCollectionMemberCount |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-UseFallbackSite
Indicates whether to use a fallback site.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet doesn't run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.