Set-DAClientDnsConfiguration
Configures the DNS server and proxy server addresses of a Name Resolution Policy Table (NRPT) entry and configures the local name resolution property.
Syntax
Default (Default)
Set-DAClientDnsConfiguration
[-DnsSuffix <String>]
[-DnsIPAddress <String[]>]
[-ProxyServer <String>]
[-Local <String>]
[-ComputerName <String>]
[-PassThru]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Set-DAClientDnsConfiguration cmdlet configures the DNS server and proxy server addresses of a Name Resolution Policy Table (NRPT) entry and configures the local name resolution property.
To modify an NRPT entry the user needs to specify the DNS suffix, the new DNS IP address or the proxy server, or the new DNS IP address and the proxy server for this suffix. To modify the local name resolution setting the Local parameter is used.
When an NRPT entry or local name resolution property is modified in a multi-___domain scenario, it is correspondingly updated in all of the client Group Policy Objects (GPOs) in various domains. This is true for multi-site and firstref_server_7 GPOs as well.
The NRPT configuration is applicable globally to the entire DirectAccess (DA) deployment and therefore is not impacted by multi-site deployment.
Examples
EXAMPLE 1
PS C:\> Set-DAClientDNSConfiguration -DNSSuffix 'contoso.com' -DnsIPAddress 2006:2005:1::3
This example will change the list of configured DNS Servers for contoso.com to 2006:2005:1::3. These changes will be made in all of the DA client GPOs.
EXAMPLE 2
PS C:\>Set-DAClientDNSConfiguration -DNSSuffix 'contoso.com' -ProxyServer 'webproxy.contoso.com:400'
This example configures a proxy server for suffix contoso.com. Since NRPT entry settings in DA are global, this change will apply to all of the DA clients.
EXAMPLE 3
PS C:\>Set-DAClientDnsConfiguration -Local 'FallbackSecure'
This example configures local name resolution to FallbackSecure, therefore ensuring that local name resolution is used only if the resource name does not exist in DNS.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Parameter properties
| Type: | CimSession[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Session |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ComputerName
Specifies the IPv4 or IPv6 address, or host name, of the computer on which the Remote Access server computer specific tasks should be run.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Cn |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DnsIPAddress
Specifies the new list of DNS server IPv4 or IPv6 addresses for the specified DNS suffix in the NRPT.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | DirectAccessDnsServers |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-DnsSuffix
Specifies the DNS suffix entry in the NRPT that needs to be modified.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Namespace |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-Local
Specifies the property of the local name resolution. The acceptable values for this parameter are:
-- FallbackSecure: Only use local name resolution if the name does not exist in DNS, which is most restrictive.
-- FallbackPrivate: Fall back to local name resolution if the name does not exist in the DNS or the DNS servers are unreachable when the client computer is on a private network, which is recommended.
-- FallbackUnsecure: Fall back to local name resolution for any kind of DNS resolution error, which is least secure.
Parameter properties
| Type: | String |
| Default value: | None |
| Accepted values: | FallbackSecure, FallbackPrivate, FallbackUnsecure |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | SecureNameQueryFallback |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ProxyServer
Specifies the new proxy server for the specified DNS suffix in the NRPT.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | DirectAccessProxyName |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
String
String
Outputs
CimInstance
CimInstance
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The DAClientDnsConfiguration object contains the following properties:
-- The NRPT entries in the NRPT table: each entry is an instance of the DnsClientNrptRule object.
-- The DnsClientNrptGlobal object which contains the local name resolution settings.