Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
Describes flash control properties in the PROPSETID_VIDCAP_CAMERACONTROL_FLASH camera control property set. This structure specifies property values that are used by applications to configure the camera's flash.
Syntax
typedef struct {
ULONG Flash;
ULONG Capabilities;
} KSPROPERTY_CAMERACONTROL_FLASH_S, *PKSPROPERTY_CAMERACONTROL_FLASH_S;
Members
Flash
Indicates requested flash settings. This value must be one of these possible values:
| Value | Meaning |
|---|---|
| KSPROPERTY_CAMERACONTROL_FLASH_OFF | The flash should never activate. |
| KSPROPERTY_CAMERACONTROL_FLASH_ON | The flash should activate regardless of lighting conditions. |
| KSPROPERTY_CAMERACONTROL_FLASH_AUTO | The flash should be controlled by the device and driver based on lighting conditions. |
Capabilities
Indicates the flash modes that the device supports. This value is a bitwise OR of these possible values:
| Value | Meaning |
|---|---|
| KSPROPERTY_CAMERACONTROL_FLASH_FLAGS_AUTO | The device and driver automatically control flash settings. |
| KSPROPERTY_CAMERACONTROL_FLASH_FLAGS_MANUAL | The user manually sets the flash settings. |
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 8 |
| Minimum supported server | Windows Server 2012 |
| Header | ksmedia.h (include Ksmedia.h) |