Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
This header is used by network. For more information, see:
wditypes.h contains the following programming interfaces:
Structures
| WDI_CHANNEL_MAPPING_ENTRY The WDI_CHANNEL_MAPPING_ENTRY structure defines a channel mapping entry. |
| WDI_DATA_RATE_ENTRY The WDI_DATA_RATE_ENTRY structure defines a data rate entry. |
| WDI_ETHERTYPE_ENCAPSULATION_ENTRY The WDI_ETHERTYPE_ENCAPSULATION_ENTRY structure defines an EtherType encapsulation entry. |
| WDI_TYPE_MIC The WDI_TYPE_MIC structure defines the MIC (802.11r). |
| WDI_TYPE_NONCE The WDI_TYPE_NONCE structure defines the SNonce or ANonce (802.11r). |
| WDI_TYPE_PMK_NAME The WDI_TYPE_PMK_NAME structure defines the PMKR0Name or PMKR1Name (802.11r). |
Enumerations
| WDI_ACTION_FRAME_CATEGORY The WDI_ACTION_FRAME_CATEGORY enumeration defines the action frame categories. |
| WDI_ANQP_QUERY_STATUS The WDI_ANQP_QUERY_STATUS enumeration defines the Access Network Query Protocol (ANQP) query status values. |
| WDI_ASSOC_STATUS The WDI_ASSOC_STATUS enumeration defines the association status values. |
| WDI_AUTH_ALGORITHM The WDI_AUTH_ALGORITHM enumeration defines the authentication algorithm values. |
| WDI_BLUETOOTH_COEXISTENCE_SUPPORT The WDI_BLUETOOTH_COEXISTENCE_SUPPORT enumeration defines Bluetooth coexistence support values. |
| WDI_BSS_SELECTION_FLAGS The WDI_BSS_SELECTION_FLAGS enumeration defines flags for BSS selection. |
| WDI_CAN_SUSTAIN_AP_REASON The WDI_CAN_SUSTAIN_AP_REASON enumeration defines the reasons the port is ready to receive a OID_WDI_TASK_START_AP request. |
| WDI_CIPHER_ALGORITHM The WDI_CIPHER_ALGORITHM enumeration defines the cipher algorithm values. |
| WDI_CIPHER_KEY_DIRECTION The WDI_CIPHER_KEY_DIRECTION enumeration defines the traffic directions decrypted by a cipher key. |
| WDI_CIPHER_KEY_TYPE The WDI_CIPHER_KEY_TYPE enumeration defines the cipher key types. |
| WDI_CONNECTION_QUALITY_HINT The WDI_CONNECTION_QUALITY_HINT enumeration defines the Wi-Fi connection quality hints. |
| WDI_DATA_RATE_FLAGS The WDI_DATA_RATE_FLAGS enumeration defines the data rate flags. |
| WDI_DS_INFO The WDI_DS_INFO enumeration defines values that specify whether the port is connected to the same DS that it was previously associated to. |
| WDI_ENCAPSULATION_TYPE The WDI_ENCAPSULATION_TYPE enumeration defines the Wi-Fi encapsulation types. |
| WDI_EXEMPTION_PACKET_TYPE The WDI_EXEMPTION_PACKET_TYPE enumeration defines the types of packet exemptions. |
| WDI_FIPS_MODE The WDI_FIPS_MODE enumeration defines values that specify if FIPS mode is enabled or not. |
| WDI_FTM_RESPONSE_STATUS The WDI_FTM_RESPONSE_STATUS defines the response status for a Fine Timing Measurement (FTM) request. |
| WDI_IHV_TASK_PRIORITY The WDI_IHV_TASK_PRIORITY enumeration defines IHV task priorities. |
| WDI_LCI_REPORT_STATUS The WDI_LCI_REPORT_STATUS enumeration defines the response status for an LCI report, if the report were requested in a Fine Timing Measurement (FTM) request. |
| WDI_OS_POWER_MANAGEMENT_FLAGS The WDI_OS_POWER_MANAGEMENT_FLAGS enumeration defines supported enablement scenarios of the NIC Auto Power Saver (NAPS) OS power management feature. |
| WDI_P2P_ACTION_FRAME_TYPE The WDI_P2P_ACTION_FRAME_TYPE enumeration defines the Wi-Fi Direct action frame types. |
| WDI_P2P_CHANNEL_INDICATE_REASON The WDI_P2P_CHANNEL_INDICATE_REASON enumeration defines Wi-Fi Direct channel indication reason values. |
| WDI_P2P_DISCOVER_TYPE The WDI_P2P_DISCOVER_TYPE enumeration defines the Wi-Fi Direct discovery types. |
| WDI_P2P_GO_INTERNAL_RESET_POLICY The WDI_P2P_GO_INTERNAL_RESET_POLICY enumeration defines the Wi-Fi Direct Group Owner internal reset policies. |
| WDI_P2P_LISTEN_STATE The WDI_P2P_LISTEN_STATE enumeration defines the Wi-Fi Direct listen states. |
| WDI_P2P_SCAN_TYPE The WDI_P2P_SCAN_TYPE enumeration defines the Wi-Fi Direct scan types. |
| WDI_P2P_SERVICE_DISCOVERY_TYPE The WDI_P2P_SERVICE_DISCOVERY_TYPE enumeration defines the types of service discovery. |
| WDI_PACKET_FILTER_TYPE The WDI_PACKET_FILTER_TYPE enumeration defines the packet filter types. |
| WDI_PHY_TYPE The WDI_PHY_TYPE enumeration defines the PHY types. |
| WDI_POWER_MODE_REASON_CODE The WDI_POWER_MODE_REASON_CODE enumeration defines the reasons for entering the Power Save state. |
| WDI_POWER_SAVE_LEVEL The WDI_POWER_SAVE_LEVEL enumeration defines the power save levels. |
| WDI_QOS_PROTOCOL The WDI_QOS_PROTOCOL enumeration defines Wi-Fi QOS protocols. |
| WDI_RADIO_MEASUREMENT_ACTION The WDI_RADIO_MEASUREMENT_ACTION enumeration defines the radio measurement actions. |
| WDI_ROAM_TRIGGER The WDI_ROAM_TRIGGER enumeration defines roam triggers. |
| WDI_SAE_INDICATION_TYPE The WDI_SAE_INDICATION_TYPE enumeration defines the type of information needed to continue SAE authentication with the BSSID, or notification that authentication cannot continue. |
| WDI_SAE_REQUEST_TYPE The WDI_SAE_REQUEST_TYPE enumeration defines the type of Simultaneous Authentication of Equals (SAE) request frame to send to the BSSID. |
| WDI_SAE_STATUS The WDI_SAE_STATUS enumeration defines SAE authentication failure error status codes. |
| WDI_SCAN_TRIGGER The WDI_SCAN_TRIGGER enumeration defines the scan trigger values. |
| WDI_SCAN_TYPE The WDI_SCAN_TYPE enumeration defines the scan types. |
| WDI_STOP_AP_REASON The WDI_STOP_AP_REASON enumeration defines the reasons an adapter cannot sustain 802.11 Access Point (AP) functionality on any of the PHYs. |
| WDI_WNM_ACTION The WDI_WNM_ACTION enumeration defines the message type for 802.11v BSS Transition Management action frames. |
| WDI_WPS_CONFIGURATION_METHOD The WDI_WPS_CONFIGURATION_METHOD enumeration defines WPS configuration methods. |