How to Skew an Object

To skew (or shear) an object means to distort an object by a specified angle from the x-axis, the y-axis, or both. For example, when you skew a square, it becomes a parallelogram.

The Matrix3x2F::Skew method takes 3 parameters:

• angleX: The x-axis skew angle, which is measured in degrees counterclockwise from the y-axis.
• angleY: The y-axis skew angle, which is measured in degrees clockwise from the x-axis.
• centerPoint: The point about which the skew is performed.

To predict the effect of a skew transformation, consider that angleX is the skew angle measured in degrees counterclockwise from the y-axis. For example, if angleX is set to 30, the object skews 30 degrees counterclockwise along the y-axis about the centerPoint. The following illustration shows a square skewed horizontally 30 degrees about the upper-left corner of the square.

Similarly, angleY is a skew angle measured in degrees clockwise from the x-axis. For example, if angleY is set to 30, the object skews 30 degrees clockwise along the x-axis about the centerPoint. The following illustration shows a square skewed vertically 30 degrees about the upper-left corner of the square.

If you set both angleX and angleY to 30 degrees, and the centerPoint to the upper-left corner of the square, you will see the following skewed square (solid outlined). Notice that the skewed square is skewed 30 degrees counterclockwise from the y-axis and 30 degrees clockwise from the x-axis.

The following code example skews the square 45 degrees horizontally about the upper-left corner of the square.

    // Create a rectangle.
    D2D1_RECT_F rectangle = D2D1::Rect(126.0f, 301.5f, 186.0f, 361.5f);

    // Draw the outline of the rectangle.
    m_pRenderTarget->DrawRectangle(
        rectangle,
        m_pOriginalShapeBrush,
        1.0f,
        m_pStrokeStyleDash
        );

    // Apply the skew transform to the render target.
    m_pRenderTarget->SetTransform(
        D2D1::Matrix3x2F::Skew(
            45.0f,
            0.0f,
            D2D1::Point2F(126.0f, 301.5f))
        );

    // Paint the interior of the rectangle.
    m_pRenderTarget->FillRectangle(rectangle, m_pFillBrush);

    // Draw the outline of the rectangle.
    m_pRenderTarget->DrawRectangle(rectangle, m_pTransformedShapeBrush);

The following illustration shows the effect of applying the skew transformation to the square, where the original square is a dotted outline and the skewed object (parallelogram) is a solid outline. Notice that the skew angle is 45 degrees counterclockwise from the y-axis.

Related topics

Direct2D Transforms Overview

Direct2D Reference