sincos - vs

Computes sine and cosine, in radians.

Syntax

vs_2_0 and vs_2_x

Where:

• dst is the destination register and has to be a Temporary Register (r#). The destination register must have exactly one of the following three masks: .x | .y | .xy.
• src0 is a source register that provides the input angle, which must be within [-pi, +pi]. {x|y|z|w} is the required replicate swizzle.
• src1 and src2 are source registers and must be two different Constant Float Register (c#). The values of src1 and src2 must be that of the macros D3DSINCOSCONST1 and D3DSINCOSCONST2 respectively.

vs_3_0

Where:

• dst is a destination register and has to be a Temporary Register (r#). The destination register must have exactly one of the following three masks: .x | .y | .xy.
• src0 is a source register that provides the input angle, which must be within [-pi, +pi]. {x|y|z|w} is the required replicate swizzle.

Remarks

vs_2_0 and vs_2_x Remarks

For vs_2_0 and vs_2_x, sincos can be used with predication, but with one restriction to the swizzle of the Predicate Register (p0): only replicate swizzle (.x | .y | .z | .w) is allowed.

For vs_2_0 and vs_2_x, the instruction operates as follows: (V = the scalar value from src0 with a replicate swizzle):

• If the write mask is .x:

  dest.x = cos( V )
  dest.y is undefined when the instruction completes
  dest.z is undefined when the instruction completes
  dest.w is not touched by the instruction
  

• If the write mask is .y:

  dest.x is undefined when the instruction completes
  dest.y = sin( V )
  dest.z is undefined when the instruction completes
  dest.w is not touched by the instruction
  

• If the write mask is .xy:

  dest.x = cos( V )
  dest.y = sin( V )
  dest.z is undefined when the instruction completes
  dest.w is not touched by the instruction
  

vs_3_0 Remarks

For vs_3_0, sincos can be used with predication without any restriction. See Predicate Register.

For vs_3_0, the instruction operates as follows: (V = the scalar value from src0 with a replicate swizzle)

• If the write mask is .x:

  dest.x = cos( V )
  dest.y is not touched by the instruction
  dest.z is not touched by the instruction
  dest.w is not touched by the instruction
  

• If the write mask is .y:

  dest.x is not touched by the instruction
  dest.y = sin( V )
  dest.z is not touched by the instruction
  dest.w is not touched by the instruction
  

• If the write mask is .xy:

  dest.x = cos( V )
  dest.y = sin( V )
  dest.z is not touched by the instruction
  dest.w is not touched by the instruction
  

The application can map an arbitrary angle (in radians) to the range [-pi, +pi] using the following shader pseudocode:

def c0, pi, 0.5, 2*pi, 1/(2*pi)
mad r0.x, input_angle, c0.w, c0.y
frc r0.x, r0.x
mad r0.x, r0.x, c0.z, -c0.x

Related topics

Vertex Shader Instructions