編集

次の方法で共有

Set-NetAdapterPowerManagement

Module:
NetAdapter Module

Sets the power management properties on the network adapter.

Syntax

ByName (Default) 

Set-NetAdapterPowerManagement
    [-Name] <String[]>
    [-IncludeHidden]
    [-ArpOffload <Setting>]
    [-D0PacketCoalescing <Setting>]
    [-DeviceSleepOnDisconnect <Setting>]
    [-NSOffload <Setting>]
    [-RsnRekeyOffload <Setting>]
    [-SelectiveSuspend <Setting>]
    [-WakeOnMagicPacket <Setting>]
    [-WakeOnPattern <Setting>]
    [-NoRestart]
    [-CimSession <CimSession[]>]
    [-ThrottleLimit <Int32>]
    [-AsJob]
    [-PassThru]
    [-WhatIf]
    [-Confirm]
    [<CommonParameters>]

ByInstanceID 

Set-NetAdapterPowerManagement
    -InterfaceDescription <String[]>
    [-IncludeHidden]
    [-ArpOffload <Setting>]
    [-D0PacketCoalescing <Setting>]
    [-DeviceSleepOnDisconnect <Setting>]
    [-NSOffload <Setting>]
    [-RsnRekeyOffload <Setting>]
    [-SelectiveSuspend <Setting>]
    [-WakeOnMagicPacket <Setting>]
    [-WakeOnPattern <Setting>]
    [-NoRestart]
    [-CimSession <CimSession[]>]
    [-ThrottleLimit <Int32>]
    [-AsJob]
    [-PassThru]
    [-WhatIf]
    [-Confirm]
    [<CommonParameters>]

InputObject (cdxml) 

Set-NetAdapterPowerManagement
    -InputObject <CimInstance[]>
    [-ArpOffload <Setting>]
    [-D0PacketCoalescing <Setting>]
    [-DeviceSleepOnDisconnect <Setting>]
    [-NSOffload <Setting>]
    [-RsnRekeyOffload <Setting>]
    [-SelectiveSuspend <Setting>]
    [-WakeOnMagicPacket <Setting>]
    [-WakeOnPattern <Setting>]
    [-NoRestart]
    [-CimSession <CimSession[]>]
    [-ThrottleLimit <Int32>]
    [-AsJob]
    [-PassThru]
    [-WhatIf]
    [-Confirm]
    [<CommonParameters>]

Description

The Set-NetAdapterPowerManagement cmdlet sets the power management properties on the network adapter. If only setting the enabled state of the properties, then run the Enable-NetAdapterPowerManagement or Disable-NetAdapterPowerManagement cmdlet.

Examples

Example 1: Enable device sleep on the disconnect feature on the specified network adapter

PS C:\> Set-NetAdapterPowerManagement -Name "Ethernet" -DeviceSleepOnDisconnect Enabled

This command enables the device sleep on disconnect feature on the network adapter named Ethernet and restarts the network adapter.

Parameters

-ArpOffload

Specifies the address resolution protocol (ARP) offload capability of the network adapter.

The computer, when in low power mode using the ARP offload technology, is able to offload the responsibility of handling responses for incoming ARP protocol requests.

Parameter properties

Type:Setting
Default value:None
Accepted values:Enabled, Disabled
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet. For more information about Windows PowerShell® background jobs, see about_Jobs.

Parameter properties

Type:SwitchParameter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Parameter properties

Type:

CimSession[]

Default value:None
Supports wildcards:False
DontShow:False
Aliases:Session

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Parameter properties

Type:SwitchParameter
Default value:False
Supports wildcards:False
DontShow:False
Aliases:cf

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-D0PacketCoalescing

Specifies the D0 packet coalescing capability of the network adapter.

This feature enables power saving on the computer by reducing the number of receive interrupts. This reduces the number of receive interrupts by coalescing random broadcast or multi-cast packets. The processing overhead and power consumption is significantly reduced on the computer.

Parameter properties

Type:Setting
Default value:None
Accepted values:Enabled, Disabled
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-DeviceSleepOnDisconnect

Specifies the device sleep on disconnect capability of the network adapter.

This feature allows the device to stand-by in a low power mode when media is disconnected and wake when media is connected again.

Parameter properties

Type:Setting
Default value:None
Accepted values:Enabled, Disabled
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-IncludeHidden

Indicates that the cmdlet includes both visible and hidden network adapters in the operation. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.

Parameter properties

Type:SwitchParameter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

ByName
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False
ByInstanceID
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-InputObject

Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.

Parameter properties

Type:

CimInstance[]

Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

InputObject (cdxml)
Position:Named
Mandatory:True
Value from pipeline:True
Value from pipeline by property name:False
Value from remaining arguments:False

-InterfaceDescription

Specifies an array of network adapter interface descriptions. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False
Aliases:ifDesc, InstanceID

Parameter sets

ByInstanceID
Position:Named
Mandatory:True
Value from pipeline:False
Value from pipeline by property name:True
Value from remaining arguments:False

-Name

Specifies an array of network adapter names.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False
Aliases:ifAlias, InterfaceAlias

Parameter sets

ByName
Position:0
Mandatory:True
Value from pipeline:False
Value from pipeline by property name:True
Value from remaining arguments:False

-NoRestart

Indicates that the cmdlet does not restart the network adapter after completing the operation. Many advanced properties require restarting the network adapter before the new settings take effect.

Parameter properties

Type:SwitchParameter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-NSOffload

Specifies the neighbor solicitation (NS) offload capability of the network adapter.

The computer, when in low power mode using the NS offload technology, is able to offload the handling of responses for incoming NS protocol requests.

Parameter properties

Type:Setting
Default value:None
Accepted values:Enabled, Disabled
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Parameter properties

Type:SwitchParameter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-RsnRekeyOffload

Specifies the Wi-Fi robust security network (RSN) rekey offload capability of the network adapter.

The computer, when it goes into sleep state, is able to offload the group temporal key (GTK) rekeying for wake on wireless LAN (WoWLAN).

Parameter properties

Type:Setting
Default value:None
Accepted values:Enabled, Disabled
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-SelectiveSuspend

Specifies the selective suspend capability of the network adapter.

The network drive interface specification (NDIS) selective suspend interface allows NDIS to suspend an idle network adapter by transitioning the adapter to a low-power state. This enables the computer to reduce the power overhead on the processor and network adapter.

Parameter properties

Type:Setting
Default value:None
Accepted values:Enabled, Disabled
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Parameter properties

Type:Int32
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-WakeOnMagicPacket

Specifies the wake on magic packet capability of the network adapter.

The magic packet is a broadcast frame containing anywhere within its payload 6 bytes of all 255 (FF FF FF FF FF FF in hexadecimal), followed by sixteen repetitions of the 48-bit MAC address of the target computer, for a total of 102 bytes.

Parameter properties

Type:Setting
Default value:None
Accepted values:Enabled, Disabled
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-WakeOnPattern

Manages the wake on pattern capability of the network adapter.

A wake pattern refers to network packet filters that determine if incoming network traffic should wake the computer. These patterns can be enabled on the network adapter.

The following wake patterns may be supported by a network adapter:

  • Wake Pattern.
  • Wake on new incoming TCP connection for IPv4 and IPv6 such as TCP SYN IPv4 and TCP SYN IPv6.
  • 802.1x re-authentication packets.
  • Bitmapped Patterns: Most network adapters can be programmed with bit-mapped pattern filters. Bitmapped patterns are defined by a bit-map mask and a pattern filter. As a network packet is received, it is masked using the bitmap mask and then compared to the pattern filter. If there is a match, then the network adapter wakes the computer.

Parameter properties

Type:Setting
Default value:None
Accepted values:Enabled, Disabled
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Parameter properties

Type:SwitchParameter
Default value:False
Supports wildcards:False
DontShow:False
Aliases:wi

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

Inputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Outputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.