Calculate a Distance Matrix

The Bing Maps Distance Matrix API provides travel time and distances for a set of origins and destinations. The distances and times returned are based on the routes calculated by the Bing Maps Route API. Times are based on predictive traffic information, depending on the start time specified in the request. Distance matrices can be calculated for driving or walking.

Distance matrices are used in several different types of applications. The most common is to power algorithms which solve the Travelling Salesman Problem (TSP) and Vehicle Routing Problem (VRP). Some other common applications include:

• Sorting search results by their actual travel distance or time.
• Determine arrival times based on travel times.
• Calculate the difference in commute times between locations. For example: We are looking to move to a new office, what is the impact on commute times for our staff?
• Clustering data based on travel time and distances. For example: Find all homes that are within 1 mile of a corner store.

When you make a request by using one of the following URL templates, the response returns a Distance Matrix resource that contains either an array of Distance Matrix cells or information on the asynchronous request that was made to calculate a distance matrix. Each distance matrix cell contains the ___location and index of the origin and destination it is related to, the travel time, and distance. For more information about the Distance Matrix resource, see Distance Matrix Data. You can also view the example URL and response values in the Examples section.

For Calculate a Distance Matrix geographic availability, see the travelMode parameter below.

API Limits

Requests to the distance matrix API can be done in one of two ways:

• Most requests can be made with a simple synchronous GET or POST request.

For travel mode driving a distance matrix that has up to 2,500 origins-destinations pairs can be requested for Basic Bing Maps accounts, while for Enterprise Bing Maps accounts the origin-destination pairs limit is 10,000. For travel mode walking, a distance matrix that has up to 650 origins-destinations pairs can be request for all Bing Maps account types. Pairs are calculated by multiplying the number of origins, by the number of destinations. For example 10,000 origin-destination pairs can be reached if you have: 1 origin, and 10,000 destinations, or 100 origins and 100 destinations defined in your request.

• More complex driving related requests which take longer to process can be made by making an asynchronous Distance Matrix request. This type of request is only accepted when the travel mode is set to driving and a start time has been specified.

When to use synchronous vs asynchronous requests

Make synchronous request if the travel mode is driving or walking and:

• The total number of origins-destinations pairs is less than or equal to 2,500 for Basic or 10,000 for Enterprise Bing Maps accounts and no start time is specified when travel mode is driving or less than or equal to 650 for all Bing Maps accounts when travel mode is walking.

    or

• The travel mode is for driving, the number of origins-destinations pairs is less than or equal to 2,500 for Basic or 10,000 for Enterprise Bing Maps accounts and a start time is specified, but not an end time. This will simply return a single cell for each origin-destination pair that is calculated using predictive traffic data.

Make an Asynchronous request if the travel mode is driving and:

• A start time and an end time is specified and the total number of origins-destinations pairs is less than or equal to 2,500 for Basic or 40,000 for Enterprise Bing Maps accounts and no start time is specified.

    or

• Your synchronous queries are frequently timing out. This may happen if the origins-destinations pairs count is large, or spatially distant.

If your scenario doesn’t fit either of the parameters outlined above for synchronous and asynchronous requests, you will need to break your request up into smaller chunks. Note that transactions are based on the total number of cells in the resulting matrix and not on the number of requests, so the same number of transactions would be generated if you make two requests that generate 100 cells each or 1 request that generates 200 cells.

How asynchronous requests work

See Asynchronous Requests documentation.

How to calculate number of cells a response will have

When calculating a simple distance matrix each origin-destination pair will generate a single cell in the matrix.

For example, a matrix that has 2 origins, and 5 destinations, will generate 10 cells where 2 * 5 = 10.

How to calculate total number of billable transactions a request will generate

A billable transaction is generated for every 4 cells in a matrix, rounded up to the nearest whole integer. For a simple matrix, billable transactions will be calculated using the following formula:

For example, a matrix that has 2 origins, and 5 destinations, will generate 3 billable transactions where Ceiling(0.25 * 2 * 5) = 3.

Supported HTTP Methods

GET, POST

POST requests require all parameters to be passed into the body of the request as a JSON object. This API is CORs enabled.

When to use HTTP GET vs POST

Many developers prefer the simplicity of HTTP GET requests which simply require generating a URL. However, browsers and servers have limits on the maximum length that URLs can be. Typically, it is best to keep your URLs under 2083 characters in length. With this in mind, it is recommended to only use HTTP GET requests when your request has less than a total of 50 origins and destinations.

URL Templates

Synchronous Distance Matrix Request URL (GET)

Retrieves a simple distance matrix for a set of origins and destinations using a HTTP GET request.

https://dev.virtualearth.net/REST/v1/Routes/DistanceMatrix?origins={lat0,long0;lat1,lon1;latM,lonM}&destinations={lat0,lon0;lat1,lon1;latN,longN}&travelMode={travelMode}&startTime={startTime}&timeUnit={timeUnit}&key={BingMapsKey}

Synchronous Distance Matrix Request URL (POST)

Retrieves a simple distance matrix for a set of origins and destinations using a HTTP POST request.

HTTP POST Request URL

https://dev.virtualearth.net/REST/v1/Routes/DistanceMatrix?key={BingMapsKey}

POST Header

Content-Length: insertLengthOfHTTPBody
Content-Type: application/json

POST body

{
    "origins": [{
        "latitude": lat0,
        "longitude": lon0
    },
    {
        "latitude": latM,
        "longitude": lonM
    }],
    "destinations": [{
        "latitude": lat0,
        "longitude": lon0
    }, 
    {
        "latitude": latN,
        "longitude": lonN
    }],
    "travelMode": travelMode,
    "startTime": startTime,
    "timeUnit": timeUnit
}

Asynchronous Distance Matrix Request URL (GET)

Creates a job to calculate a distance matrix using an asynchronous GET request. This type of request is only supported when the travel mode is set to driving. A start time must be specified when making asynchronous requests.

https://dev.virtualearth.net/REST/v1/Routes/DistanceMatrixAsync?origins={lat0,long0;lat1,lon1;latM,lonM}&destinations={lat0,lon0;lat1,lon1;latN,longN}&travelMode={travelMode}&startTime={startTime}&timeUnit={timeUnit}&key={BingMapsKey}

Asynchronous Distance Matrix Request URL (POST)

Creates a job to calculate a distance matrix using an asynchronous POST request. This type of request is only supported when the travel mode is set to driving. A start time must be specified when making asynchronous requests.

HTTP POST Request URL

https://dev.virtualearth.net/REST/v1/Routes/DistanceMatrixAsync?key={BingMapsKey}

HTTP POST Header

Content-Length: insertLengthOfHTTPBody
Content-Type: application/json

HTTP POST body

{
    "origins": [{
        "latitude": lat0,
        "longitude": lon0
    },
    {
        "latitude": latM,
        "longitude": lonM
    }],
    "destinations": [{
        "latitude": lat0,
        "longitude": lon0
    }, 
    {
        "latitude": latN,
        "longitude": lonN
    }],
    "travelMode": travelMode,
    "startTime": startTime, 
    "timeUnit": timeUnit
}

URL for checking Asynchronous Request status (GET)

The initial asynchronous response includes a callbackUrl property which contains the URL that can be used to check the status of the job. Alternatively, the callback URL can also be generated by appending the requestId that is returned in the initial asynchronous request along with the same Bing Maps key used, with the DistanceMatrixAsyncCallback endpoint as shown below. The response from this request will indicate if the request is complete or not, if complete it will provide a resultUrl property which is a URL that can be used to download the results.

https://dev.virtualearth.net/REST/v1/Routes/DistanceMatrixAsyncCallback?requestId={requestId}&key={BingMapsKey}

Template Parameters

Response

A DistanceMatrix resource is returned when you make a request with one of the following URLs. For more information about the DistanceMatrix resource, see Distance Matrix Data. For more information about the common response syntax for the Bing Maps REST Services, see Common Response Description. JSON and XML responses are provided for the URL examples in the following section.

These URLs support JSON (application/json) and XML (application/xml) response formats. A JSON response is provided by default unless you request XML output by setting the output (o) parameter. For more information, see Output Parameters.

Examples

All examples include a GET and its equivalent POST and will use the following set of origins and destinations.

Origins:

• Seattle, WA (47.6044, -122.3345)
• Redmond, WA (47.6731, -122.1185)
• Bellevue, WA (47.6149, -122.1936)

Destinations:

• Portland, OR (45.5347, -122.6231)
• Renton, WA (47.4747, -122.2057)

Calculate a simple driving based Distance Matrix (synchronous)

The following example shows how to request a simple driving based distance matrix for the set of origins and destinations. To view the complete XML and JSON responses, see Distance Matrix Example.

HTTP GET Request URL

https://dev.virtualearth.net/REST/v1/Routes/DistanceMatrix?origins=47.6044,-122.3345;47.6731,-122.1185;47.6149,-122.1936&destinations=45.5347,-122.6231;47.4747,-122.2057&travelMode=driving&key={BingMapsKey}

HTTP POST Request URL

https://dev.virtualearth.net/REST/v1/Routes/DistanceMatrix?key={BingMapsKey}

HTTP POST Header

Content-Length: 450
Content-Type: application/json

HTTP POST Body

{
    "origins": [{
        "latitude": 47.6044,
        "longitude": -122.3345
    },
    {
        "latitude": 47.6731,
        "longitude": -122.1185
    },
    {
        "latitude": 47.6149,
        "longitude": -122.1936
    }],
    "destinations": [{
        "latitude": 45.5347,
        "longitude": -122.6231
    }, 
    {
        "latitude": 47.4747,
        "longitude": -122.2057
    }],
    "travelMode": "driving"
}

Calculate a simple driving based Distance Matrix for specific time (synchronous)

The following example shows how to request a simple driving based distance matrix for the set of origins and destinations for a specified time, June 15^th, 2017 at 1PM PST. This request will automatically use predictive traffic data to provide accurate estimates.

HTTP GET Request URL

https://dev.virtualearth.net/REST/v1/Routes/DistanceMatrix?origins=47.6044,-122.3345;47.6731,-122.1185;47.6149,-122.1936&destinations=45.5347,-122.6231;47.4747,-122.2057&travelMode=driving&startTime=2017-06-15T13:00:00-07:00&key={BingMapsKey}

HTTP POST Request URL

https://dev.virtualearth.net/REST/v1/Routes/DistanceMatrix?key={BingMapsKey}

HTTP POST Header

Content-Length: 497
Content-Type: application/json

HTTP POST Body

{
    "origins": [{
        "latitude": 47.6044,
        "longitude": -122.3345
    },
    {
        "latitude": 47.6731,
        "longitude": -122.1185
    },
    {
        "latitude": 47.6149,
        "longitude": -122.1936
    }],
    "destinations": [{
        "latitude": 45.5347,
        "longitude": -122.6231
    }, 
    {
        "latitude": 47.4747,
        "longitude": -122.2057
    }],
    "travelMode": "driving",
    "startTime": "2017-06-15T13:00:00-07:00"
}

Calculate a simple driving based Distance Matrix for specific time (asynchronous)

The following example shows how to request a simple driving based distance matrix for the set of origins and destinations for a specified time, June 15^th, 2017 at 1PM PST. This request will automatically use predictive traffic data to provide accurate estimates. To view the complete XML and JSON responses, see Distance Matrix Asynchronous Example.

HTTP GET Request URL

https://dev.virtualearth.net/REST/v1/Routes/DistanceMatrixAsync?origins=47.6044,-122.3345;47.6731,-122.1185;47.6149,-122.1936&destinations=45.5347,-122.6231;47.4747,-122.2057&travelMode=driving&startTime=2017-06-15T13:00:00-07:00&key={BingMapsKey}

HTTP POST Request URL

https://dev.virtualearth.net/REST/v1/Routes/DistanceMatrixAsync?key={BingMapsKey}

HTTP POST Header

Content-Length: 497
Content-Type: application/json

HTTP POST Body

{
    "origins": [{
        "latitude": 47.6044,
        "longitude": -122.3345
    },
    {
        "latitude": 47.6731,
        "longitude": -122.1185
    },
    {
        "latitude": 47.6149,
        "longitude": -122.1936
    }],
    "destinations": [{
        "latitude": 45.5347,
        "longitude": -122.6231
    }, 
    {
        "latitude": 47.4747,
        "longitude": -122.2057
    }],
    "travelMode": "driving",
    "startTime": "2017-06-15T13:00:00-07:00"
}

Once the initial request is made a requestId will be returned. A requestId is a unique identifier for the asynchronous request. This can be used to monitor the status of the request until it is completed, at which point the response will include a resultUrl property which the resulting distance matrix can be downloaded from. The following URL checks that status of an asynchronous request that has a requestId of 90b07189-33d8-4cbf-866a-1bd5c5b4f474.

https://dev.virtualearth.net/REST/v1/Routes/DistanceMatrixAsyncCallback?requestId=90b07189-33d8-4cbf-866a-1bd5c5b4f474&key={BingMapsKey}

HTTP Status Codes

When the request is successful, the following HTTP status code is returned.

• 200

When the request is not successful, the response returns one of the following errors.

• 400
• 401
• 404
• 429
• 500
• 503

See Also

• Using the REST Services with .NET
• Distance Matrix Data
• Distance Matrix Example
• Distance Matrix Asynchronous Example